Jewelry Tools
Browse Subcategories
Plastic coating on tips provides chemical resistance. Use with steam cleaners and ultrasonic cleaners for non scratch retrieving. Cross lock version,mad of Nickel plated steel.
Closing pressure is easily adjusted with these slidelock tweezers. Blunt points.
Metal: Stainless Steel
Length 6-1/2″
Point: Serrated tip
With fiber grips for heat resistance. Overall length 6-1/2 inches
With fiber grips for heat resistance. Overall length 6-1/2 inches
Nickel plated steel tweezers with blunt serrated points.
Nickel plated steel tweezers with sharp serrated points.
Nickel plated steel tweezers with sharp points.
Removes scratches, scuffs and blemishes from plastic watch crystals, cell phone displays, MP3 players, digital book readers, iPads, CDs, DVDs and more- surface must be plastic.
Pair of motor brushes for discontinued CC, DD and MM motors (115 volt only).
The “Original Ring Adjuster” Ring Snuggies provide a snug fit for a ring on any finger.
Jewelers JKit – Great intro to Pacific Abrasives
Super New Glue has a different formula than other super glues giving it superior holding quality even under the toughest conditions. New Glue is made in the USA. 3 gram bottle.
Kit includes inner shaft, pair of motor brushes, grease, and operation manual.
Made of the highest quality optical glass, this Optivisor 2.75X (#7) lens plate has a 6 inch focal length.
Kit includes inner shaft, pair of motor brushes, grease, and operation manual.
Inexpensive loupe great for giveaways or promotions. Available in 10X with plastic lens frame and aluminum housing.
32-5/8″ long, standard material outer sheath comes equipped on ALL Flexades: S.B0-516, S.B0-14, S.B0-12, S.B0-38
37-1/8″ long standard material outer sheath for discontinued EE, GG, MMG geared motors and models 975, 980W, and 981W.
Our customers say that this is the world’s best 6pc wax needle file set. The teeth are finer and there are more teeth per inch than others.
This idea makes a lot of sense – files made specifically for wax carving. Single cut teeth won’t clog and the files can be held like a pen for good control.
The finest steel, milled to perfection with a diamond coating makes this 5pc set the best for precision filing jobs. Longevity is assured, as the diamond particles are electroplated onto the surface of the metal.
36-1/4″ long, standard material outer sheath comes equipped on most motors.
This 33-1/2″ long inner shaft should be used to replace broken or worn shafts on these discontinued motors:
F, JJ, JB.
This 39-1/4″ long inner shaft should be used to replace broken or worn shafts on these discontinued motors:
EE, GG, MMG.
This 39″ long inner shaft comes installed and should be used to replace broken or worn shafts on various motors.
A lightweight vise mounted in a wood handle. Smooth jaws are 1-1/4″ wide and open to 1″. Overall length is 6-1/4″.
Serrated, grooved, spring action jaws open and close with large wing nut. Handles are hollow so that long wire will pass through. Two jaw widths are available. Both open to 1/4″. Overall length is 4-1/2″.
Midget-sized hollow handle metal pin vise with screw chuck. Capacity 0 to .020″ (0 to .51 mm), overall length 1-7/8″.
Steel collet Is set into hollow brass handle with screw chuck. Capacity is 0 to .028″ (0 to .71mm), overall length 3-1/8″.
Different size steel collets are mounted in both ends of hollow handle. Capacity 0 to .099″ (0 to 2.5 mm), overall length 4-1/4″
With large free wheeling head, making it suitable for drilling, tapping, or using as a screwdriver.
H.18D has the same specs as the H.18, except includes a duplex spring for added flexibility. H.18 is for use with only 2.35mm (3/32″) shank burs.
Has two steel chucks with spare chuck held in end of hollow brass handle. Will not roll off your bench. Capacity 0 to .079″ (0 to 2.0 mm).
The H.18 is for use with only 2.35mm (3/32″) shank burs.
H.15D has the same specs as the H.15, except includes a duplex spring for added flexibility.
The H.15 Handpiece has hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work.
H.10 is a slender handpiece with rotating lever action that releases and closes the collet for quick and easy changes.
H.10D has the same specs as the H.10, except includes a duplex spring for added flexibility.
The H.8 is a slim collet type handpiece with pre-lubricated ball bearings that require no additional lubrication.
The H.8D has the same specs as the H.8, except includes a duplex spring for added flexibility.
The H.30® general purpose handpiece has prelubricated ball bearings that do NOT require any additional lubrication. Comes with HPCK-0 Chuck Key in molded plastic handle for changing accessories.
This 1/8″ thick rubber cushion provides an added layer of comfort to H.30 and H.30SJ Handpieces. Grip slides on easily but holds firmly.
Here the M.SR Hang-up style Motor, our most popular model, is teamed up with the C.FCT-1 foot operated Speed Control in plastic housing.
Foot operated speed control comes in a heavy, cast iron metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR.
Foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot.
This foot operated speed control comes in a heavy cast iron metal housing. The extra weight provides added stability and control.
Tool steel collets grip firmly when screw chuck is tightened. Chromium-plated handles are hollow to permit holding of long wires.
Tool steel collets grip firmly when screw chuck is tightened. Chromium-plated handles are hollow to permit holding of long wires.
The reliable C.FCT-1 is Foredom’s most popular foot operated speed control. It is made of heavy-duty plastic with durable solid state electronics.
Includes Pin Vices: 0 to .040″, .025″ to .062″, .050″ to .125″, and .115″ to .188″.
Knurled ring slides forward to close steel jaws, making It easy to operate with one hand. Handle is hollow. Capacity 0 to .051″ (0 to 1.3mm). Overall length is 4-1/8″.
Indented. Overall length 4-3/8 inches (111 mm). Sharp points.
Metal: Stainless Steel
Point: Medium Sharp
- 20X Magnification
- 21mm Lens diameter
- LED light
- On/Off switch
- Batteries included
With a revolutionary micro fiber that will not snag or shed it is the optimal texture and softness for cleaning film from precious stones especially diamonds.