Soldering
Browse Subcategories
For all gold, silver and platinum soldering. This is a white borax-based paste which provides substantial oxide protection. This should be used in addition to a firecoat on the joints to be soldered.
Replacement Tip for Iso-Tip Soldering Iron by Wahl (Choose Style)
For hard soldering with flame. Stays put like a paste, will not run like a liquid and yet is transparent. Eliminates blind joint soldering. Jel-Flux produces less oxides and residues, allowing for faster pickling. With no toxic fumes and it’s biodegradable
Standard sodium bisulfate compound is mixed with warm water to make economical solution. Works best at 125 F (52 C).
Soft, fire-proof material, into which work or pins can be easily pressed. Measures 6″ x 3″ x 11/2″. Withstands temperatures up to 2000¬_ F (1093¬_ C).
A dry, granular acid compound used to pickle gold, silver, and other non-ferrous metal castings.
Iron Binding Wire, 29 Gauge, 8 oz spool. Iron Binding Wire used in Jewelry making to hold together parts to be soldered or cemented.
Replacement Tips for Hoke-Jewel Torch
GRS Third-Hand Attachments make precise soldering easy by holding parts in the exact position needed.
Our copper pickling tweezers provide more strength than ordinary copper tweezers. Made to lift heavier objects legs are less flexible than others.
This style with a non-roll handle features a titanium shaft which is the absolute best for all non-ferrous metal except platinum.
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Rubber body with Teflon tip, makes it suitable as a blower or for suctioning excess molten solder.
Speedwire with its cleverly designed dispenser makes laser welding easier and more efficient. The dispenser keeps your coiled wire clean and tangle free in a clear tube. A simple thumb screw feeds or retracts the wire as needed.
Solder sheets can be easily cut in clipped pieces. Sheets are placed on bottom jaw and snipped. Pieces drop out cleanly. These can also be used to cut wire solder by inserting the wire into the side hole. Available in size; 1.5 mm.
Standard sodium bisulfate compound is mixed with warm water to make economical solution. Works best at 125 F (52 C).
Iron Binding Wire, 22 Gauge, 8 oz spool. Iron Binding Wire used in Jewelry making to hold together parts to be soldered or cemented.
Multiple orifice design gives you maximum melting power and increased versatility for melting platinum, gold, silver or bronze in a crucible.
Designed for use with the “Little Torch”, but can be used with any torch. Easy to read. UL listed.
Gas: Propane
Fits Cylinder: Fits disposable propane
Designed for use with the “Little Torch”, but can be used with any torch. Easy to read. UL listed.
Gas: Oxygen
Fits Cylinder: Fits disposable oxygen
Well-constructed camel hair brush are noted for durability.
7″ inches long.
Revolutionary All-in-one Firescoff® is a spray-on ceramic coating that provides ultra-consistent solder flow and unbeatable protection against firescale.
Revolutionary All-in-one Firescoff® is a spray-on ceramic coating that provides ultra-consistent solder flow and unbeatable protection against firescale.
A quick and clean, creamy paste flux for silver brazing and hard soldering. Use with all jewelers’ metals including silver, gold, copper, nickel and platinum. 12 oz.
This is a hot and handy item for depositing flux or any other liquid exactly where you want it with just an easy squeeze. The bottle has a two ounce capacity.
This 7-1/4 inch tall Max Flame Butane torch not only has a large flame nozzle but also has a larger capacity giving a longer burn time.
This style with a non-roll handle features a titanium shaft which is the absolute best for all non-ferrous metal except platinum.
Replacement carbon filters for use in our Fume Extractor (CLN-950.00). Pack of two.
Lead-free solder has created a healthier environment, but the more active fluxes required to be used with it give off more fumes. Our new Fume Extractor is the perfect solution to this smoky problem.
Mounted on base with swivel to provide the exact position or angle desired. 6″ ceramic rod is much cleaner than carbon and holds heat better. Clamp releases rod for replacement.
Ceramic 6×6 block with feet. Non-asbestos. Withstands temperatures up to 2000 F (1093 C). Rubber feet keep board raised above bench.
Prevents solder from flowing to unwanted areas. Brushes on easily. 1/2 oz. bottle.
A pickling compound for nickel, German silver, brass, bronze, copper, and imitation gold metals. 2 1/2 lb container.
Speedwire with its cleverly designed dispenser makes laser welding easier and more efficient. The dispenser keeps your coiled wire clean and tangle free in a clear tube. A simple thumb screw feeds or retracts the wire as needed.
Speedwire with its cleverly designed dispenser makes laser welding easier and more efficient. The dispenser keeps your coiled wire clean and tangle free in a clear tube. A simple thumb screw feeds or retracts the wire as needed.
Speedwire with its cleverly designed dispenser makes laser welding easier and more efficient. The dispenser keeps your coiled wire clean and tangle free in a clear tube. A simple thumb screw feeds or retracts the wire as needed.
Most popular for soldering with blowpipes. Sold by the piece. Size: 4-1/2″ x 3/4″ x 1″
Made of propionate material. Fits over virtually all prescription and plano safety glasses. Adjustable fit through inclination mechanism on temple. Shade is 5.0 green.
A dry, granular acid compound used to pickle gold, silver, and other non-ferrous metal castings.
A liquid hard soldering flux that prevents the formation of firecoat and firescale during soldering.
8 oz.
When this powder is mixed with water or alcohol, it can be used to prevent the flow of solder to unwanted areas, such as a previously soldered joint or the moving parts of a catch.
Size: 1/2 lb. box
Effectively prohibits the flow of solder to unwanted areas.
Size: 4 oz.
Ingenious dispenser contains solder with flux. The proper amount of solder and flux can be placed at the exact point required, eliminating waste and improving the appearance of the joint. Solder contains no cadmium. 1/2 oz.
Available in 1/4 oz. sheets.
Grade: Easy
Melting Point: 1240°F (671°C)
A general purpose zinc chloride flux for soldering with all soft solders use with tin-lead solder, tin-antimony solder, Stay-Brite solder.
Used for soldering virtually all metals, except aluminum, magnesium or titanium. Not recommended for use in electrical or electronic applications.
Cross-locking, 6 1/2″ tweezers closes when released. Mounted on heavy-duty horseshoe base.
The Economical Answer to Safe Soldering! Flame causes fire resistant hose casing to change color, but internal hose remains intact. A hose that is non-flame resistant will melt, creating a dangerous situation. 12′ Pair of Hoses For Little Torch and Gentec Torch, 2 Hose Clamps Included
For picking up crucibles and 1-1/2 inches (38 mm) diameter flasks. Length: 19 inches (483 mm)