Soldering
Browse Subcategories
Well-constructed camel hair brush are noted for durability.
7″ inches long.
Replacement Tips for Hoke-Jewel Torch, Oxygen & Natural Gas
Replacement Tips for Hoke-Jewel Torch
Used on regulators so that standard ID hose can be used. Right hand thread for oxygen. Size: 9/16″ – 18 for 3/16″ ID
Used on regulators so that standard ID hose can be used. Right hand thread for oxygen. Size: 3/8″ -24 for 3/16″ID
A liquid hard soldering flux that prevents the formation of firecoat and firescale during soldering.
8 oz.
This style with a non-roll handle features a titanium shaft which is the absolute best for all non-ferrous metal except platinum.
This style with a non-roll handle features a titanium shaft which is the absolute best for all non-ferrous metal except platinum.
A dry, granular acid compound used to pickle gold, silver, and other non-ferrous metal castings.
Used on regulators so that standard ID hose can be used. Left Hand Thread for Fuel Gas. Size: 3/8″ – 24 for 3/16″ ID
Prevents solder from flowing to unwanted areas. Brushes on easily. 1/2 oz. bottle.
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 3oz.
Standard sodium bisulfate compound is mixed with warm water to make economical solution. Works best at 125 F (52 C).
This is a hot and handy item for depositing flux or any other liquid exactly where you want it with just an easy squeeze. The bottle has a two ounce capacity.
Rubber body with Teflon tip, makes it suitable as a blower or for suctioning excess molten solder.
Effectively prohibits the flow of solder to unwanted areas.
Size: 4 oz.
Torch Holder, High bracket-type with narrow top
Used on tripod, charcoal block, or asbestos, so that work can be heated from below while soldering or enameling. Measures 6″ x 6″.
Replacement Tip for Iso-Tip Soldering Iron by Wahl (Choose Style)
This curved copper tong is great to use with pickling solutions. Rigid and well-made. Length 8-1/2″.
A hard soldering paste flux for use on all ferrous and non-ferrous metals and alloys.
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 8oz.
Replacement carbon filters for use in our Fume Extractor (CLN-950.00). Pack of two.
Our tungsten soldering pick can withstand higher temperatures than titanium picks. Will not contaminate platinum. Length: 6″.
Prepared borax for making flux for soldering jewelry. Dissolves easily when rubbed on borax slate. Comes in 4 oz. cone.
Protects jewels from heat while soldering. No need to remove jewels from settings (except opals). If flame is used for soldering, the jewel will stay cool. Rinses off in plain water. 8 oz. jar.
Iron Binding Wire, 22 Gauge, 8 oz spool. Iron Binding Wire used in Jewelry making to hold together parts to be soldered or cemented.
For hard soldering with flame. Stays put like a paste, will not run like a liquid and yet is transparent. Eliminates blind joint soldering. Jel-Flux produces less oxides and residues, allowing for faster pickling. With no toxic fumes and it’s biodegradable
This economy model is the ideal tool to hold settings and shanks together for accurate soldering. Length 5-1/2 -140mm-.
Torch Holder For Bench, Low bracket-type with wide top
Used as an anti-oxidizer soldering or in making flux. 16 oz.
Revolutionary All-in-one Firescoff® is a spray-on ceramic coating that provides ultra-consistent solder flow and unbeatable protection against firescale.
A non-corrosive flux, harmless to hands or clothing. Washes off with water even after drying. Works with any soft solder. 1/2 oz. bottle.
High-grade, superfine, Boric Acid Powder. Use as high-grade flux and deoxidizing agent. Can also be mixed with denatured alcohol to make soldering flux.
Soft, fire-proof material, into which work or pins can be easily pressed. Measures 6″ x 3″ x 11/2″. Withstands temperatures up to 2000¬_ F (1093¬_ C).
Medium lump pumice is heat reflecting and perfect for supporting your project either flat or embedded. 2 lb bag.
Our copper pickling tweezers provide more strength than ordinary copper tweezers. Made to lift heavier objects legs are less flexible than others.
Formulated for extended shelf life versatility and convenience. The gel makes it easy to use and less mess with better results. Non-hazardous.
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Soldering pic with titanium tip and metal handle. For gold and silver solder.
Wood handle with sharp pointed tip for placing, holding and positioning solder in just the right place. Gold & silver soldering with titanium tip.
Flame can be adjusted by raising or lowering split sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel. 1/2″ wick diameter.
A dry, granular acid compound used to pickle gold, silver, and other non-ferrous metal castings.
Iron Binding Wire, 27 Gauge, 8 oz spool. Iron Binding Wire used in Jewelry making to hold together parts to be soldered or cemented.
Handy double third hand work holder features clips mounted on a weighted base to hold items stable and secure in any position while soldering. Enables user to have both hands free while working.
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 16oz.