Soldering
Browse Subcategories
The battery is part # 7733 and allows the quick charge of the cordless Iso-Tip soldering irons. For current production of Quick Charge models #7700, #7740 and #7750.
The 7700 is the basic unit and the biggest seller for a good reason. The 7700 is the crank up window of our soldering irons. The people that use them will use words like, dependable, bullet proof or easy battery change.
Revolutionary All-in-one Firescoff® is a spray-on ceramic coating that provides ultra-consistent solder flow and unbeatable protection against firescale.
Revolutionary All-in-one Firescoff® is a spray-on ceramic coating that provides ultra-consistent solder flow and unbeatable protection against firescale.
This special Firescoff formula offers additional protection for temperature-sensitive metals such as rhodium-plated white gold, gold-filled and silver.
A quick and clean, creamy paste flux for silver brazing and hard soldering. Use with all jewelers’ metals including silver, gold, copper, nickel and platinum. 12 oz.
It’s the tried-and-true jewelers’ hard soldering flux. Yellow-green and self-pickling, it is the best in water-based fluxes. Well-mixed to eliminate suspension.
Permits mixing of acetylene with air at the torch head, so no other source of air is necessary.
Our copper pickling tweezers provide more strength than ordinary copper tweezers. Made to lift heavier objects legs are less flexible than others.
Made specifically for the difficult task of holding half or quarter shanks in place while soldering with no fumbling or misalignment. Invented by a bench jeweler.
This economy model is the ideal tool to hold settings and shanks together for accurate soldering. Length 5-1/2 -140mm-.
This is a hot and handy item for depositing flux or any other liquid exactly where you want it with just an easy squeeze. The bottle has a two ounce capacity.
A jeweler’s dream for soldering rings when re-sizing. Just fill the cup with cold water and submerge the stone and mounting while soldering the shank to keep the stone cool
Formulated for extended shelf life versatility and convenience. The gel makes it easy to use and less mess with better results. Non-hazardous.
Formulated for extended shelf life versatility and convenience. The gel makes it easy to use and less mess with better results. Non-hazardous.
Medium lump pumice is heat reflecting and perfect for supporting your project either flat or embedded. 2 lb bag.
This 7-1/4 inch tall Max Flame Butane torch not only has a large flame nozzle but also has a larger capacity giving a longer burn time.
This style with a non-roll handle features a titanium shaft which is the absolute best for all non-ferrous metal except platinum.
This style with a non-roll handle features a titanium shaft which is the absolute best for all non-ferrous metal except platinum.
3pc soldering pick set features 3 colors: blue gold and red to keep you from cross contaminating.
Our solder cutting pliers offer two ways to cut. It cuts sheet solder in 1/16 -1.60mm- squares or wire solder up to 18 gauge in 1/16 -1.60mm- lengths.
Flame can be adjusted by raising or lowering slit sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel.
Flame can be adjusted by raising or lowering split sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel. 1/2″ wick diameter.
Electronic instant-ignition system for push-button start-ups. Both flame and temperature can be adjusted precisely.
Replacement carbon filters for use in our Fume Extractor (CLN-950.00). Pack of two.
Lead-free solder has created a healthier environment, but the more active fluxes required to be used with it give off more fumes. Our new Fume Extractor is the perfect solution to this smoky problem.
Prepared borax for making flux for soldering jewelry. Dissolves easily when rubbed on borax slate. Comes in 4 oz. cone.
Non-asbestos. Flat on one side, with grooves on the other, for holding shanks, chains, etc. Withstands temperatures up to 2000F (1093C). Measures 71/2″ x 71/4″ x 7/8″.
Contain no asbestos. Lightweight blocks reflect heat and perforations hold pins to keep work in place while heating. Withstands temperatures up to 2000F (1093C).
Replacement asbestos free soldering board 6″ x 12″. Withstands temperatures up to 3000F (1640C) for soldering or torch use.
Replacement asbestos free soldering board 6″ x 6″. Withstands temperatures up to 3000F (1640C) for soldering or torch use.
Soft, fire-proof material, into which work or pins can be easily pressed. Measures 6″ x 3″ x 11/2″. Withstands temperatures up to 2000¬_ F (1093¬_ C).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Rubber body with Teflon tip, makes it suitable as a blower or for suctioning excess molten solder.
Mounted on base with swivel to provide the exact position or angle desired. 6″ ceramic rod is much cleaner than carbon and holds heat better. Clamp releases rod for replacement.
Holds rings, leaving both hands free. Mounted in fixed position on asbestos-free base. Length of rod is 6″.
Grooved work surface disk is 41/2″ in diameter. Rotates on ball bearings, lazy-susan style, providing 360 degree access. Perfect for soldering small parts.
For all gold, silver and platinum soldering. This is a white borax-based paste which provides substantial oxide protection. This should be used in addition to a firecoat on the joints to be soldered.