Watch Tools
Browse Subcategories
Simple yet perhaps the most effective drain trap available. The stainless steel rim and screen are heavy enough to stay put and the fine mesh catches the smallest of stones or particles.
Pen-shaped, spring-loaded mechanism. Measures 43/4″ long with 1/16″ diameter fiberglass brush. Great for tight places and electronic applications. Made in Germany.
Oilers Swiss Dip Style Set x4. Includes Red, Black, Blue & Green.
Wheel Diameter: 1″
Wheel Thickness: 1/4″
Hole Size: 1/16″
Ideal for use with rubberized abrasives. Sold by dozen.
Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).
Easy-to-use, economical watch strap hole punch for professional watchmakers.
Polyimide tape is used to protect parts of a watch band or bracelet that you do not want to be polished while polishing other parts of the watch like the crystal.
This vise with 2 inch jaws offers a choice of clamping or screwing onto the bench. An excellent value and a necessity for every bench.
Economically priced magnifier. 3X power, diameter 1 3/4″, working distance 3 1/2″.
Metal: Stainless Steel, Length: 4-3/4″, Point: Sharp
With brass collar. Used with rubber points. Sold by dozen.
Plastic coating on tips provides chemical resistance. Use with steam cleaners and ultrasonic cleaners for non scratch retrieving. Cross lock version,mad of Nickel plated steel.
Metal: Non-Magnetic Stainless Steel
Length: 4-1/2″
Point: Sharp
A lightweight vise mounted in a wood handle. Smooth jaws are 1-1/4″ wide and open to 1″. Overall length is 6-1/4″.
Snap those stubborn pins out in a hurry with this clever device.
Lightweight nylon black frame with soft PVC nosepiece. Molded-in side protection offers increased coverage for side impart. Adjustable temples lock into place.
This Horotec bench mat is ultra thin yet sturdy. Mat has slightly sticky backing that allows it to stay in place, while also allowing for easy repositioning. It is roughly the same size as other bench mats at 13 3/4″ x 9 1/2″ x 0.1″.
Simple but practical for holding bridge with balance attached while putting it in beat, straightening kinks in hairspring, undercutting screws, adding or removing timing washers, etc.
ETA/Valjoux 7750 Series Plastic Movement Holder
Used as a base for riveting, drilling and staking small parts, our hex anvil is case hardened and well polished for long life.
Made of clear lucite our plier rack keeps tools off the bench and easy to find. Rack is over ten inches long and features holes for needle files burs and other tools.
Used as a cleaner, polisher, lubricant, and rust preventer. General purpose oil for clocks. Also effective lubricant for tools and light machinery. 4 oz. bottle.
Cross-locking, 6 1/2″ tweezers closes when released. Mounted on heavy-duty horseshoe base.
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 9, 0.60mm.
Made with 100% polycarbonate 4-C coating on both sides of lenses, providing anti-fog, anti-static, anti-scratch properties and anti-UV up to 385 mm. Clear lenses.
Drum barrel made to fit over a standard watchmaker’s screwdriver to give you a better grip and more torque. With a knurled finish, the barrel attaches to screwdriver with a set-screw. 4 sizes available.
Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 45mm in diameter.
For use with wheels having 1/16″ arbor holes. Sold by dozen.
High quality extra fine diamantine powder produces a final high luster on parts and tools.
Economical, imported loupes with ground and polished lenses set in lightweight black plastic frames. Working distance is 1 1/2″ with 7X power.
Green triple layered mat in a self-healing material which enables the user to cut more accurately without dulling blades. Measures: 8-1/2″ x 12″.
Designed to make opening watch cases easier. Just position the point between the case back and the case and slowly push.
This 3″ cushion gives a soft padded surface to protect the watch face when opening and closing cases changing batteries removing pins and doing other work on watches and watch straps.
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Swiss made screwdriver. Replacement blades sold here.
Available in black, gold or silver this economical line of loupes offers the user 10 X 18mm triplets at a price that can’t be beat. Excellent for department stores. Comes in its own leather case.
Popular for use with rubberized abrasives. Sold by dozen.
Swiss Pattern Tweezer, Grobet USA Brand, Pattern #3C
For holding and tying knots. Length 4-1/4 inches (108 mm). Metal: Stainless Steel, Point: Very Sharp
Will fit whell sizes up to those listed. No. 43.158 is ideal for use with rubberized abrasives. Sold by dozen.
Strengthened Polyimide stick, can be used in the place of traditional pegwood. One end is pointed, the other end is flat.
With reversible steel collets in each end. Hexagonal heads prevent rolling. Hollow handle and heads made of brass. Capacity is 0 to .125″ (0 to 3.2 mm). Overall length 4-1/8″ .
Replacement flat head tip for the screwdriver that removes oyster and jubilee bracelet link screws on Rolex® watches. 1.7mm Flat head tip fits Rolex® bracelet screws. OEM blade and tip sized to match the Rolex® Tool 2100. Tips are held in place with a set screw
Replacement flat head tip for the screwdriver that removes oyster and jubilee bracelet link screws on Rolex® watches. 1.3mm Flat head tip fits Rolex® bracelet screws. OEM blade and tip sized to match the Rolex® Tool 2100. Tips are held in place with a set screw
Replacement tip for the screwdriver that removes oyster and jubilee bracelet link screws on Rolex® watches. A 0.90mm pointed pusher tip is used for spring bar removal through the lug hole. OEM blade and tip sized to match the Rolex® Tool 2100. Tips are held in place with a set screw.
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657