Watch Case Tools
Browse Subcategories
Provides maximum torque with little effort. 4 pairs of interchangeable pins (round, rectangle, knurled, curved). Large ergonomic top wheel for screwing and unscrewing with little effort.
Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns
This tool extracts bezels from divers watches. Provide with three different clamping jaws. Removes bezels from 27mm to 45mm.
Horizontal-type vise with center support allows for positioning blades on two sides at once. The blades are forced in with a few turns of the knob. Two pairs of blades included, 2mm and 4mm. Swiss.
Tool for assembling and disassembling screw-on watch pushers and watch tubes, and watch oscillating weight bolts. Assortment of 14 interchangeable keys in metal storage base.
Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.
Horotec Polishing Vice For Watch Case Backs Ø25-50mm
Assortment of seven red suction dies for screw back watches. These dies are made of a soft, synthetic material that forms to fit almost any case back you come across. Sizes included are: 16, 20, 23, 26, 30, 34, and 40mm. Works perfectly with the Horotec Minipress and Maxipress.
Bergeon Case Opening Wrench to Fit Rolex Watches, Includes handle and six dies, Dies sized from 18.5 – 29.5mm
This Watch Bezel Remover is ideal for use on gold cases and bezels that are commonly used on Rolex and other expensive watches.
Set includes seven dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
Seven pusher punch bits: 2.95 mm, 2.65 mm, 2.45 mm, 2.15 mm, 1.95 mm, 1.75 mm, and 1.55 mm. Will remove friction fit buttons & fit friction fit buttons back into the piece. Swiss made.
Set of four dies for opening Omega Seamaster case backs. Sizes included are: 20mm, 30mm, 33mm, 42mm. Swiss Made.
Case opener specially made for Baume & Mercier. Contents 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
10 stainless steel pins with stainless steel pin holder. Sizes included: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.20, 1.50, 1.80, 2.00 mm
A solid case holder especially designed for holding modern large size watches. Can hold cases of various shapes and sizes between 20 to 60 mm in diameter.
Nylon dies for BB Style Press. 16 double sided dies with flat and tapered walls. Can be used for closing cases, press fitting crystals or installing bezels.
Contents: 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
This Jaxa-Mini case wrench is specifically designed to open case backs of large watches. The ergonomic shape provide a firm and comfortable grip. Opens diameters from 18 mm to 62 mm Delivered with 1 set of 2 pins. SWISS MADE
Large opening case opener. Open larger cases without detaching the bracelet using this tool with 55mm span and small head.
Horotec Metal Case Opener w/4 Nylon Dies. Swiss Made.
The six tempered rings are precision-made to interlock so they will not slip. The sturdy cast frame fits into your bench vise and the small bar gives you the torque you need for stubborn case backs.
For those hard to open cases this is your best tool! Quality made and easy to use.
All Aluminum
Tapered on one side and straight on the other
Fits most BB style presses
6 pieces per set
Sizes include:
45×47
50×53
54×55
55×57
58×60
62×64
Removes and inserts immediately, crystals without dis-assembling the watch. Will not damage the crystal. For any unbreakable crystal without tension ring.
5 Delrin® Screw-on Reversible Dies for Fitting Large Case Bezels
Made to fit the Rolex Sky Dweller Model. Will work work both Horotec and Bergeon Openers.
Opens all sizes and shapes of waterproof cases. Comes with four sets of pins for case backs with notches holes knurled or polygon.
Better grip thanks to it’s anodized aluminium handle Ø 23 mm. Stainless steel blade. Total length: 138 mm.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
High quality, stainless steel dies are machined perfectly to fit the Breitling® cases.
Taps for 5.3mm and 6.0mm Rolex case tubes. Use these to clean up or re-align the threads of Rolex case tubes. ***McCaw Co is independent of and not affiliated with or sponsored by Rolex® Watch U.S.A. Inc. Rolex® warranty does not apply to non-genuine parts supplied by McCaw Co***
This Horotec tool can be used with all the different dies that are available to fit Baume Mercier, Rolex, Omega, Breitling and many other screw back style watch brands. Swiss Made.
Die to open the Citizen Aqualand dive watch. This die has 5 notches that fit perfectly in the caseback. Made in France.
Inner Bezel Fitting Die for Rolex. Used in newer sapphire cases. 32.00mm interior opening.
Bergeon Double Lever Case Opener. Has two edges for opening snap back cases, one on the end and one on the side. The edges are smaller than on other tools for more delicate cases.
20mm, 30mm, 33mm & 42mm 5 prong case back openers for Omega Seamaster watches. Horotec Swiss Made.
This combination case closer/crystal press beats anything in its price range and beyond. Don’t destroy watch cases or case backs by using the wrong tool. Our Combo Closer will give you years of satisfaction and service. Another Eurotool best buy.
Enables the range of Bergeon 5537 Rolex dies and Breitling dies to be used with Horotec MSA07.320, Horotec MSA07.363 & Bergeon 5700-Z waterproof case openers.
Stainless steel blades with solid green wooden handle. Set of 4, to open numerous snap back watch cases with ease. Comes in a plastic housing to keep tools organize. Handy for all watchmakers alike. Size: 155mm x 145mm x 37mm.
25 Piece Set : 24 Nylon, Non-Mar Dies! Straight Wall, Flat & Rectangular Dies. Up to 60mm!
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm