Watch Case Tools

Artifex Abrasive Wheel Medium hardness & grain, SC150MP, foamed polyurethane. 100mm x 20mm x 6mm Hole. Made in Germany. Perfect for polishing cases, specifically high end brands such as Rolex.

Artifex Abrasive Wheel Medium hardness & grain, SC150MP, foamed polyurethane. 100mm x 10mm x 6mm Hole. Made in Germany. Perfect for polishing cases, specifically high end brands such as Rolex.

Die to open the Citizen Aqualand dive watch. This die has 5 notches that fit perfectly in the caseback. Made in France.

Removes and inserts immediately, crystals without dis-assembling the watch. Will not damage the crystal. For any unbreakable ­crystal without tension ring.

Inner Bezel Fitting Die for Rolex. Used in newer sapphire cases. 32.00mm interior opening.

Deluxe bench knife features riveted handle and tempered blade. Excellent for opening watch cases. Length: 5-1/4″ (135mm).

Bergeon Scratch Brush Refills-12 piece pack

“Jaxa” Style Case Wrench for Oversize Watches. Fits watches 18-62mm. 3 sets of 4 different pin types. Opens all sizes and shapes of waterproof cases.

Stainless steel blades with solid green wooden handle. Set of 4, to open numerous snap back watch cases with ease. Comes in a plastic housing to keep tools organize. Handy for all watchmakers alike. Size: 155mm x 145mm x 37mm.

This Horotec tool can be used with all the different dies that are available to fit Baume Mercier, Rolex, Omega, Breitling and many other screw back style watch brands. Swiss Made.

Seven pusher punch bits: 2.95 mm, 2.65 mm, 2.45 mm, 2.15 mm, 1.95 mm, 1.75 mm, and 1.55 mm. Will remove friction fit buttons & fit friction fit buttons back into the piece. Swiss made.

This combination case closer/crystal press beats anything in its price range and beyond. Don’t destroy watch cases or case backs by using the wrong tool. Our Combo Closer will give you years of satisfaction and service. Another Eurotool best buy.

Horotec Polishing Vice For Watch Case Backs Ø25-50mm

6″ lengths in assorted sizes from 14 to 21 by B&S gauge. Used to make pins, rivets, hinges, etc.

Big watches are popular! This new version of the original Jaxa style case wrench now accommodates larger size watches up to 55mm diameter.

Choose from 5.3(yellow) & 6.0(blue) case tube remover for Rolex.

Dial Support by Bergeon

For those hard to open cases this is your best tool! Quality made and easy to use.

Replacement Bits For Bergeon 2819/4 and 2819/8, Jaxa Swiss-Made Hand Wrench. 4 different sets, 3 pieces each. See listings.

Beregon 30409-C watch crown winder tool. Use this handy tool on manual wind watches with crown sizes 4.0-5.5mm. Easy to use, just press the spring loaded top to expose the jaws. Made of nickel plated brass. Tool measures 3.5″ x 0.4″.

Menzerna 491FF, Polishing paste for stainless steel, fine polish, white, 250 gram bar

Set of 8
Flat die sizes: 35 mm, 40 mm, and 45 mm
Double sided concave die sizes: 40/42.5 mm, 45/47.5 mm, 54/55 mm, 50/52.5 mm, and 56/57 mm

Casing cushion with a gray anodized aluminum ring. 75mm in diameter.

Taps for 5.3mm and 6.0mm Rolex case tubes. Use these to clean up or re-align the threads of Rolex case tubes. ***McCaw Co is independent of and not affiliated with or sponsored by Rolex® Watch U.S.A. Inc. Rolex® warranty does not apply to non-genuine parts supplied by McCaw Co***

Opens to accept all size waterproof cases. Will not mar watch cases.

Includes 24 nylon dies.

To protect the components when take off / setting hands or bezels and opening/closing of screwed or pressured case backs. Strong and flexible.
Ø 85 mm, thickness 0.08 mm.

Casing cushion “Large size”. With a synthetic ring. Central hollowed felt covered, with stamoïd, non-scratching the crystals and the cases. Provided with nonskid coating. Height: 15 mm.

A must for every watchmaker this movement holder clamps onto the edge of your bench. The holder is made of metal and will hold any size movement.

It is great for curing ultraviolet glue for mineral watch crystal assembly, diamond grading, and other jewelry repairs.

This universally popular shape gives watchmakers the small handle necessary to properly grip when prying open snap-on case backs.

Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm

Rolex Case Back Opening Die for Stainless Steel Daytona 126500 42mm Models. Will work work both Horotec and Bergeon Openers.

Set includes seven dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.

Bergeon Double Lever Case Opener. Has two edges for opening snap back cases, one on the end and one on the side. The edges are smaller than on other tools for more delicate cases.

Bergeon Case Opening Wrench to Fit Rolex Watches, Includes handle and six dies, Dies sized from 18.5 – 29.5mm