Watch Case Tools
Browse Subcategories
Made for pocket and large watches popular today. Well-made solid metal holder fits in any bench vise.
It is great for curing ultraviolet glue for mineral watch crystal assembly, diamond grading, and other jewelry repairs.
Set of 3 Pins for L-G Opener “Multinotch cover”
Opens all sizes and shapes of waterproof cases. Comes with four sets of pins for case backs with notches holes knurled or polygon.
The six tempered rings are precision-made to interlock so they will not slip. The sturdy cast frame fits into your bench vise and the small bar gives you the torque you need for stubborn case backs.
Horotec Concave Delrin Die. For replacement of delrin die on Maxi-Press & Mini Press.
Replacement Tip for Horotec Case Opener MSA07.115 – 4mm
Replacement Tip for Horotec Case Opener MSA07.115 – 2mm
Designed to make opening watch cases easier. Just position the point between the case back and the case and slowly push.
Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns
This tool offers the best of both worlds – price and quality. Made of metal with multiple dies this crystal press/case closer is the perfect tool for snap-back cases.
The EURO TOOL case press offers the best inexpensive case closer available. This is one of our most popular items and the closer we most recommend. Every bench should have one.
Comes with standard brush and 12 mm diameter round concave tip. Great for lens, watch crystals, and dials.
Non-marring bezel remover
Outside diameter 2.6″ inches (66mm)
Inside diameter 1.65″ inches (42mm)
For bezel diameters 38-45mm
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm
Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.
Set includes seven dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
Horizontal-type vise with center support allows for positioning blades on two sides at once. The blades are forced in with a few turns of the knob. Two pairs of blades included, 2mm and 4mm. Swiss.
Pointed Tip Only, 0.8mm, Swiss for Metal Spring Bar Tools
Case opener specially made for Baume & Mercier. Contents 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
Bergeon Double Lever Case Opener. Has two edges for opening snap back cases, one on the end and one on the side. The edges are smaller than on other tools for more delicate cases.
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657
Replacement blades for Horotec MSA07.117 Bezel Remover. Mirror polished, hardened blades are interchangeable on all sides of the bezel remover.
Reversible tip featuring a .80mm straight tip and a 1.20mm forked end.
Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]
This combination case closer/crystal press beats anything in its price range and beyond. Don’t destroy watch cases or case backs by using the wrong tool. Our Combo Closer will give you years of satisfaction and service. Another Eurotool best buy.
Die to open the Citizen Aqualand dive watch. This die has 5 notches that fit perfectly in the caseback. Made in France.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
This Jaxa-Mini case wrench is specifically designed to open case backs of large watches. The ergonomic shape provide a firm and comfortable grip. Opens diameters from 18 mm to 62 mm Delivered with 1 set of 2 pins. SWISS MADE
Elongated Square Jaws for Horotec Press. Fits Mini or Maxi Press.
Elongated Round Jaws for Horotec Press. Fits Mini or Maxi Press.
Set of 8
Flat die sizes: 35 mm, 40 mm, and 45 mm
Double sided concave die sizes: 40/42.5 mm, 45/47.5 mm, 54/55 mm, 50/52.5 mm, and 56/57 mm
Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.
10 stainless steel pins with stainless steel pin holder. Sizes included: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.20, 1.50, 1.80, 2.00 mm
Casing cushion with a chromed metallic ring. 75mm in diameter.
Bestfit Springbar Removing Tool. Includes fine point and forked tip.
Bergeon 5674-D Replacement nylon jaw for Bergeon 5674 Case Vise. Sold per jaw.
Taps for 5.3mm and 6.0mm Rolex case tubes. Use these to clean up or re-align the threads of Rolex case tubes. ***McCaw Co is independent of and not affiliated with or sponsored by Rolex® Watch U.S.A. Inc. Rolex® warranty does not apply to non-genuine parts supplied by McCaw Co***
Nylon dies for BB Style Press. 16 double sided dies with flat and tapered walls. Can be used for closing cases, press fitting crystals or installing bezels.
Set of four dies for opening Omega Seamaster case backs. Sizes included are: 20mm, 30mm, 33mm, 42mm. Swiss Made.
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
Assortment of seven red suction dies for screw back watches. These dies are made of a soft, synthetic material that forms to fit almost any case back you come across. Sizes included are: 16, 20, 23, 26, 30, 34, and 40mm. Works perfectly with the Horotec Minipress and Maxipress.
This is the replacement blade for the Right Handed Bergeon Case Opener Tool 6987.
5 Delrin® Screw-on Reversible Dies for Fitting Large Case Bezels
Contents: 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
For opening and closing screw backs and bezels. Has two cup sizes for 0 to 18s watches.
Modeled after the famous JAXA but less expensive this case wrench meets the highest standards at a moderate price. Packed in a hardwood box. Sets of spare pins also sold separately. 5-1/2 length.
Hold watch straps in place while repairing or changing a battery without having to remove the band. Comes with a nylon die that will not mar or scratch crystals.
28.30mm Replacement Die for Bergeon 5537 Wrench.
Bergeon Swiss Made pocket watch keys. 5 different size winding keys. The arms are for sizes 2, 4, 6, 8, and 10.
Bergeon Swiss Made pocket watch keys. 5 different size winding keys. The arms are for sizes 3, 5, 7, 9, and 11.
Horotec Metal Case Opener w/4 Nylon Dies. Swiss Made.
To protect the components when take off / setting hands or bezels and opening/closing of screwed or pressured case backs. Strong and flexible.
Ø 85 mm, thickness 0.08 mm.