Watch Case Tools
Browse Subcategories
This Horotec tool can be used with all the different dies that are available to fit Baume Mercier, Rolex, Omega, Breitling and many other screw back style watch brands. Swiss Made.
Seven pusher punch bits: 2.95 mm, 2.65 mm, 2.45 mm, 2.15 mm, 1.95 mm, 1.75 mm, and 1.55 mm. Will remove friction fit buttons & fit friction fit buttons back into the piece. Swiss made.
Beregon 30409-C watch crown winder tool. Use this handy tool on manual wind watches with crown sizes 4.0-5.5mm. Easy to use, just press the spring loaded top to expose the jaws. Made of nickel plated brass. Tool measures 3.5″ x 0.4″.
This combination case closer/crystal press beats anything in its price range and beyond. Don’t destroy watch cases or case backs by using the wrong tool.
Bergeon 5674-D Replacement nylon jaw for Bergeon 5674 Case Vise. Sold per jaw.
Taps for 5.3mm and 6.0mm Rolex case tubes. Use these to clean up or re-align the threads of Rolex case tubes. ***McCaw Co is independent of and not affiliated with or sponsored by Rolex® Watch U.S.A. Inc. Rolex® warranty does not apply to non-genuine parts supplied by McCaw Co***
Horotec Polishing Vice For Watch Case Backs Ø25-50mm
Casing cushion “Large size”. With a synthetic ring. Central hollowed felt covered, with stamoïd, non-scratching the crystals and the cases. Provided with nonskid coating. Height: 15 mm.
Big watches are popular! This new version of the original Jaxa style case wrench now accommodates larger size watches up to 55mm diameter.
A must for every watchmaker this movement holder clamps onto the edge of your bench. The holder is made of metal and will hold any size movement.
This universally popular shape gives watchmakers the small handle necessary to properly grip when prying open snap-on case backs.
Opens all sizes and shapes of waterproof cases. Comes with four sets of pins for case backs with notches holes knurled or polygon.
For those hard to open cases this is your best tool! Quality made and easy to use.
Used as a cover over watch faces and bracelets for protection during handling or transportation. Clings to glass, plastic and metal without glue or gum. Leaves no residue!
Bergeon Double Lever Case Opener. Has two edges for opening snap back cases, one on the end and one on the side. The edges are smaller than on other tools for more delicate cases.
Menzerna 491FF, Polishing paste for stainless steel, fine polish, white, 250 gram bar
Set of 8
Flat die sizes: 35 mm, 40 mm, and 45 mm
Double sided concave die sizes: 40/42.5 mm, 45/47.5 mm, 54/55 mm, 50/52.5 mm, and 56/57 mm
Casing cushion with a gray anodized aluminum ring. 75mm in diameter.
Nylon dies for BB Style Press. 16 double sided dies with flat and tapered walls. Can be used for closing cases, press fitting crystals or installing bezels.
Better grip thanks to it’s anodized aluminium handle Ø 23 mm. Stainless steel blade. Total length: 138 mm.
To protect the components when take off / setting hands or bezels and opening/closing of screwed or pressured case backs. Strong and flexible.
Ø 85 mm, thickness 0.08 mm.
It is great for curing ultraviolet glue for mineral watch crystal assembly, diamond grading, and other jewelry repairs.
Horotec Concave Delrin Die. For replacement of delrin die on Maxi-Press & Mini Press.
This Watch Bezel Remover is ideal for use on gold cases and bezels that are commonly used on Rolex and other expensive watches.
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm
Set includes seven dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
For closing/opening watches with screw on backs.
Bergeon Case Opening Wrench to Fit Rolex Watches, Includes handle and six dies, Dies sized from 18.5 – 29.5mm
Bergeon watch case opener. Swiss made. Lever width 5mm, lever length 110mm.
Set of double-ended wheel countersinks in tempered steel – 4 pieces Our set includes 4 double-ended wheel countersinks made of high-quality tempered steel, perfect for watchmaking and precision tasks. Specifications: Wheels diameters: 1.80-2.10 / 2.50-3.00 / 3.50-4.00 / 4.50-5.00 mm Delivered in a convenient plastic pouch for easy storage and transportation.
Beregon 30409-A watch crown winder tool. Use this handy tool on manual wind watches with crown sizes 3.0-4.5mm. Easy to use, just press the spring loaded top to expose the jaws. Made of nickel plated brass. Tool measures 3.5″ x 0.4″.
Horotec Key For Screw-on tubes Ø 2.75 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
Assortment of seven red suction dies for screw back watches. These dies are made of a soft, synthetic material that forms to fit almost any case back you come across. Sizes included are: 16, 20, 23, 26, 30, 34, and 40mm. Works perfectly with the Horotec Minipress and Maxipress.
This tool extracts bezels from divers watches. Provide with three different clamping jaws. Removes bezels from 27mm to 45mm.
Artifex Abrasive Wheel Fine, SC80WP. Grit 80, foamed polyurethane. 100mm x 10mm x 6mm Hole. Made in Germany.
For use in screw-in and unscrew of pusher tubes. Aluminum Handle. Three different tubes sizes available. Swiss Made.
Parallel closing jaws with circular, rubber padded, hinged discs provide dependable case closing. Overall length is 7 1/2″.
Polished and tempered steel blade with knife edges. Mounted in hardwood handle with metal ferrule. Overall length 4 1⁄2″ (114 mm).
Excellent work surface for delicate parts. Pad size measures 50mm in diameter.
Easy-to-use sliding clamp is great for securely holding a variety of parts while working. Spring-operated with plastic posts which will not mar or scratch your piece.