Shop
Browse Subcategories
Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.
Face Diameter: 5/8″ (16 mm)
Head Length: 2 5/8″ (67 mm)
Head Weight: 5 oz. (142 g)
Economical quality hammers designed for silversmiths and ideal for craftsmen. Complete with hardwood handles.
You save
Provides a square vise-like grip. Chain nose, Smooth, Slot – Cross, Overall length 5″.
Provides a square vise-like grip. Light, flat nose, Smooth, Slot “V”, Overall length 5″.
Provides a square vise-like grip. Heavy, flat nose, Serrated, Slot “V”, Overall length 5-1/2″.
These versatile, stainless steel pliers can be used as a clamp, heat sink or third hand while soldering. Handles have a two-position locking device and are insulated with vinyl plastisol. Overall length 5 3/4″. Curved.
These versatile, stainless steel pliers can be used as a clamp, heat sink or third hand while soldering. Handles have a two-position locking device and are insulated with vinyl plastisol. Overall length 6″. Straight.
Box joint construction. Polished heads with double leaf spring return. Plastic grip handles. Overall length is 4-1/2″. Round nose.
Kit of 20 cleaning sticks
Clean dials & crystals and not leave a trace!
Used in training seminars
Box joint construction. Polished heads with double leaf spring return. Plastic grip handles. Overall length is 4-1/2″. Chain nose.
The jaws are made of hardened tool steel The cutters are able to cut memory wire up to 16 gauge and sprues up to 1/8″. The Grobet Compound cutter has an overall length is 8-1/2″ and a jaw length of 5/8″.
Used to tighten loose prongs or for initial setting of stones. Overall length is 5″.
For setting or tightening the prongs on stone set rings. Jaws have been shaped so that they fit over the prongs on a setting. Overall length is 5″. Economical value.
Curved tips taper to 1/16″ for setting small stones. Box joint for alignment with built-in spring. Overall length is 4-1/2″.
Heavy-duty pliers for closing bows and loops. Rugged enough for bending ring shanks. Overall length is 6 1/2″.
Combination round nose and side cutter. Use for making loops, bends and cutting wire without changing tools. 5-1/4″ Overall length.
Provide greater accessibility. Overall length is 5-1/4″, smooth jaws 1-5/8″. Chain nose.
Round nose type. Provides greater accessibility. Overall length is 5 1/4″, smooth jaws 1 5/8″.
Provide greater accessibility. Overall length is 5 1/4″, smooth jaws 1 5/8″. Flat nose.
Jaws taper to 1/32″ at tips and jaw edges are beveled to prevent marring of soft wire. Used to make bends and for gripping and manipulating wires. Overall length 5-1/4″.
Jaws taper to 1/32″ at tips and jaw edges are beveled to prevent marring of soft wire. Used to make bends and for gripping and manipulating wires. Overall length 4-1/2″.
Lightweight stainless steel work pliers have smooth jaws and are completely rust proof. Polished heads prevent marking soft metals. Cushion grip handles. Overall length is 5 1/4″. Made in Germany.
Lightweight stainless steel work pliers have smooth jaws and are completely rust proof. Polished heads prevent marking soft metals. Cushion grip handles. Overall length is 4 1/2″. Made in Germany.
Regular edges for cutting soft to medium hard wires. Length of cut 5/8″. Overall length 5-1/4″
Regular edges for cutting soft to medium hard wires. Length of cut 5/8″. Overall length 5″.
Regular edges for cutting soft to medium hard wires. Jaws are set at right angles for getting close to work. Length of cut 3/4″. Overall length 5-1/4″
Regular edges for cutting soft to medium hard wires. Jaws are set at right angles for getting close to work. Length of cut 3/4″. Overall length 4 1/2″.
One smooth jaw is half-round and the other is flat. Overall length 5-1/4″, width of jaw 1/4″.
Extra Duty box-joint pliers feature double-leaf springs and red vinyl grips. Made in Germany of the finest European steel.
Smooth jaws taper to 3/16″ at tip for holding and manipulating flat pieces. Overall length 5-1/4″, length of jaws 1″.
Top quality box joint construction – smooth, non-mar jaws. Brushed satin finish and double leaf spring return. Foam grip comfort handles. Overall length is 4-3/4″. Side cutter.
Top quality box joint construction – smooth, non-mar jaws. Brushed satin finish and double leaf spring return. Foam grip comfort handles. Overall length is 4-3/4″. Chain nose.
Contains three pliers (Nos. 46.052, 46.054, and 46.056) plus two nippers (Nos. 46.062 and 46.066) in deluxe vinyl pouch. Priced lower than when tools are purchased separately.
Head is angled with pointed tip for getting into tight places. Semi-flush cutting edges are for precision wire cutting of soft wires. Overall length 4-1/4″, length of cut 9/16″.
Smooth jaws taper to 1/8″ at tips. For holding and manipulating flat pieces. Overall length 5″, length of jaws 7/8″.
Large, grooved, semi-circular jaws hold rings during filing or polishing. With box joint. Overall length is 5-1/2.
For closing and adjusting pendant bows and bending rings. With box joint. Overall length is 6″ (152 mm). Economical value.
Made in Germany. Small lightweight pliers, designed for delicate work. All have box joints to assure perfect alignment with smooth jaws and cushion grips. Overall length is 4-1/2″. Chain nose, length of jaw 7/8″
Purple Wax, medium hard with medium flexibility. All-purpose wax is ideal for models with extensive piercing, baguettes and air line openings. Softening temperature 225°F (107°C).
You save
The Versa-Light is a super bright LED light with three settings: High Beam, Low Beam and Flash. The sturdy clip holds the light while the 8-1/2 inch flexible arm allows for easy adjustment. The strong magnetic base stays secure on metal surfaces for hands free work. Use the light zoom function to pinpoint light onto small areas or zoom out for a wider view. Includes 3 AAA batteries.
Grobet USA Swiss Pattern Precision file. Used for filing slots in small screws. 0.022″ in thickness. Single cut on both edges – Both sides are safe.
This handsome multi-fold supple black leather diamond wallet fits perfectly into pockets. It features a reinforced grommet for use with safety chains. Elastic bands insure security. Luxuriously lined with silk. 4 x 7 x 1/2
The standard for quality and performance! Round files are gradually tapered and cut and workable to the point. Used where it is necessary to enlarge a hole or round off a radius. Double cut.
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.