Shop
Browse Subcategories
Size 10 1/2L
Hand size 70/120/18
Day/Date @3
Stem 065-501
Battery 371
Eco Drive capacitor 295-67(included)
Eco Drive capacitor 295-51(included)
Size 10 1/2
Hand Size 70/120/17
Stem 065-507
Date @3
Eco Drive Capacitor 295-51(included)
Size 10 1/2
Hand Size 70/120/17
Stem 065-507
Day/Date @3
Can replace Citizen E100
Our gauges are nickel-plated for years of use at the retail level. Graduated in U.S. Standard half-sizes. Half-Round size 1 to 15
This value engineered 9-3/8 caliper measures inside outside and depth. The gauge is accurate to 0.02mm with a measuring range of 0mm to 150mm.
Very clean and durable all-purpose swabs. These swabs are acid and solvent resistant and are ideal for tough scrubbing around raised shapes or delicate cleaning applications. Round tip bg/12.
Replacement carbon filters for use in our Fume Extractor (CLN-950.00). Pack of two.
Lead-free solder has created a healthier environment, but the more active fluxes required to be used with it give off more fumes. Our new Fume Extractor is the perfect solution to this smoky problem.
Accurate, yet economical, scale weighs in 2 oz. increments. Easy to read red and black numerals on 4″ dial indicate weight, as well as water/investment ratios. Includes scoop. 10 pound capacity.
Zenith Rinse Solution 224 has more solvency and penetrating power than ordinary rinses. As an added plus it is rated odorless. It is compatible with all Zenith’s solvent based cleaners.
Unitized, or “layered” construction provides an excellent starting point where small diameters and narrow widths are needed in heavy duty blending and finishing jobs. Use instead of rubber bonded wheels.
Great for cleaning and maintaining hard to reach areas on platinum, gold, silver, copper, pewter and brass pieces. Embedded mineral abrasive is harder than most metals.
This watch rinsing solution was formulated by L&R chemists to be a quick-drying, clear, petroleum distillate.
For use when ammonia fumes are unacceptable. For use with L&R #3 Rinse or L&R Ultrasonic Watch Rinsing Solution.
Medium, soft and flexible. For smoothing surfaces and refining edges. Operating speed range is 5,000 to 12,000 RPM.
Sold by the box of 12.
Medium, soft and flexible. For smoothing surfaces and refining edges. Operating speed range is 5,000 to 12,000 RPM.
Sold by the box of 12.
Coarse pre-polish wheels. For smoothing surfaces. Operating speed range is 5,000 to 12,000 rpm.
Sold by the box of 12.
.
Coarse pre-polish wheels. For smoothing surfaces. Operating speed range is 5,000 to 12,000 rpm.
Sold by the box of 12
Coarse pre-polish wheels. For smoothing surfaces. Operating speed range is 5,000 to 12,000 rpm.
Sold by the box of 12.
Fine,soft, and flexible. For medium luster or smooth matte finish. Operating speed range is 5,000 to 10,000 rpm.
Sold by the box of 12.
Non-asbestos. Flat on one side, with grooves on the other, for holding shanks, chains, etc. Withstands temperatures up to 2000F (1093C). Measures 71/2″ x 71/4″ x 7/8″.
Safely remove hands from wrist watches. Swiss Made.
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Rubber body with Teflon tip, makes it suitable as a blower or for suctioning excess molten solder.
High-grade, superfine, Boric Acid Powder. Use as high-grade flux and deoxidizing agent. Can also be mixed with denatured alcohol to make soldering flux.
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 8oz.
Automatic Drop Oiler for Shock Protection Devices and Balance Bearings of all Kinds Without Removing the Cap Jewel. E.G., Incabloc, Kif, setting jewels etc.
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size.
Bergeon plastic bench mat 250mm x 350mm x 0.5mm. Self adhesive sticks to any work bench. Mat is antistatic. Works well in watchmaking and jewelry applications.
Domed Mineral Glass- Flat Bottom, 1mm thick for watch crystal replacement
Sapphire 0.80mm thick watch crystals for replacement
Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.
Set includes seven dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
Superior quality, soft textured buffs, stitched with leather centers, are perfect for use with rouge to produce a high finish.
Diameter: 5″
Ply: 50
Stitching: 3 Rows
Leather Center
Superior quality, soft textured buffs, stitched with leather centers, are perfect for use with rouge to produce a high finish.
Diameter: 5″
Ply: 45
Stitching: 3 Rows
Leather Center