Shop
Browse Subcategories
Nylon dies for BB Style Press. 16 double sided dies with flat and tapered walls. Can be used for closing cases, press fitting crystals or installing bezels.
Size 13 1/4 L
5.00mm thick
Hand size 150/200/30/80/20
Date @4
Battery 394
24 full half-spheres on Wooden Base. All punches are polished and hardened to 50 Rockwell hardness at both ends, the sphere end and the hit end of the punch.
10 stainless steel pins with stainless steel pin holder. Sizes included: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.20, 1.50, 1.80, 2.00 mm
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
Base for screwing and unscrewing bracelets. Includes 4 screwdriver blades 1.0, 1.4, 1.8, 3.0 mm. Blade height can be easily adjusted with the thumb screw. 70mm base.
Drop injection oiler. For train wheel pivots, cup bearings, everywhere the oiler has to be positioned before depositing oil.
Used for removing watch crystals from one-piece watch cases. Available with 3 size watch case fittings:∅ 1.60 – 2.00 – 2.50 mm Includes key for removing the half-stem with the crown Size 4 X 0.79 X 0.79″ Inches (103 X 20 X 20mm) Swiss Made
Supplied with 1/16″ center hole and can be used with mandrels with 3/32″ or 1/8″ shank in power tools with safe maximum speed of 25,000 RPM. Sold by box of 100.
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
Swiss made tool for removing broken screws from watch movements. Includes two double sided bits (.80mm and 1.00mm).
The innovative design enables the user to raise, lower, or tilt, to direct the light source quickly and efficiently. Perfect for precision work!
H.15D has the same specs as the H.15, except includes a duplex spring for added flexibility.
A premium collection of 9 Swiss Screwdrivers on a rotating stand including 9 spare blades. Hardened stainless steel blades. Sizes: 0.50, 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50 mm.
The H.15 Handpiece has hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work.
Economical workhorse, ideal for precision work. Ball-bearing motor runs smoothly, requires no lubrication. Includes motor, handpiece, and foot pedal. Full 1-year warranty.
Cost effective way to accurately measure gemstones; delivers millimeter read out with instant carat conversion.
Reduces and enlarges rings without effort. This well-made sizer has six splines on the enlarging mandrel and takes rings up to size 15. The reducing plate has sixteen openings and is smoothly polished to prevent marring. Can be bolted to bench or used as a portable.
Set of four dies for opening Omega Seamaster case backs. Sizes included are: 20mm, 30mm, 33mm, 42mm. Swiss Made.
Genuine Omega Stainless Steel Watch Clasp 117ST1508835
Genuine Black Omega Alligator 12mm Watch Strap 97361022
Genuine Omega Deville 97634049 Green Croco Leather Watch Strap. 16mm, buckle side 14mm. Buckle not included. Fits Omega case: 196.0316
Firs models: SBBN011 SBBN013 Fits case# 7C46-0AA0
Complete with 4 collets in sizes .80mm, 1.0mm, 1.20mm, 1.50mm.
Three piece Bergeon pin vice assortment. Sizes included: 0.0-0.5mm 0.5-1.0mm/1.0-1.5mm 1.0-1.5/1.50-2.0mm
Bergeon Ergonmic Oilers. Set of Four Oilers: Red/Blue/Green/Yellow, High Precision, Stainless Steel Needles, Anti-Static Handles
Designed for use with the “Little Torch”, but can be used with any torch. Easy to read. UL listed.
Gas: Oxygen
Fits Cylinder: Fits disposable oxygen
Designed for use with the “Little Torch”, but can be used with any torch. Easy to read. UL listed.
Gas: Propane
Fits Cylinder: Fits disposable propane
The H.8D has the same specs as the H.8, except includes a duplex spring for added flexibility.
Set of 10 entirely stainless steel ergonomic colour coded screwdrivers in a wooden box. Sizes:0.50mm, 0.60mm, 0.80mm, 1.00mm,1.20mm,1.40mm,1.60mm, 2.00mm, 2.50mm and 3.00mm.
Bergeon 7100 Movement Holder – specifically for ETA 7750 series. Will also work with Sellita SW500. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
The M-24 precisely determines gold karat values equal to or greater than 9K 10K 12K 14K 16K 18K 20K 22K and 24K.
Case opener specially made for Baume & Mercier. Contents 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
Assortment of 4 anodized aluminum oil cups with ceramic cups. The oil cups can be used individually or on the base plate.
Tool allowing to adjust the opening resistance of the folding clasp buckles. Includes 6 nylon dies: 3 convex and 3 concave. Swiss Made.
Genuine Omega Stainless Steel Clasp 117ST1612932
Genuine Omega 20mm Black Textured Calf Watch Band 97361079. Takes a 16mm buckle(not included)
Genuine Omega Speedmaster Stainless Steel Watch Clasp 117ST1469811
Eco Drive capacitor 295-56(included)
Size 14 1/2
Hand Size 70/120/20
Stem 065-526
Chrono, 3 eyes
Can replace Citizen C650
Identifies, detects and separates diamond from CZ, moissanite (including the new most difficult F1 moissanite) and white sapphire
Assortment of 9 watchmakers screwdrivers with ball bearing heads. This set is in a nice wooden case and includes nine spare blades and two spare set screws. Sizes included: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50, 3.00mm.
Set of 15 Reamers and Spindle from Bergeon.
Precision pliers with a locking thumb screw for fine adjustment of cannon pinions.
The H.18 is for use with only 2.35mm (3/32″) shank burs.