Shop
Browse Subcategories
Genuine Omega Two Tone Watch Clasp 117DR1552862
Genuine Seiko 7C46 movement date @3 The day dial is not included with the movement, you will have to use your old day dial from the movement you are replacing.
Size 11 1/2 L
4.60mm thick
Hand Size 90/150/25
Date Dial @3
Solenoid Valve With Conduit, 110 volt for Grobet USA® Steam Cleaner, 110 volt, Item No. 24.900P
Speedwire with its cleverly designed dispenser makes laser welding easier and more efficient. The dispenser keeps your coiled wire clean and tangle free in a clear tube. A simple thumb screw feeds or retracts the wire as needed.
Bergeon bracelet cutter. Cuts sprues up to 1/8″ (3mm) thick. Jaws are 7/8″ (2mm) long and pointed for easier access to tight areas. Made in Switzerland.
Size 10 1/2L
4.70mm Thick
Hand Size 90/150/30
Sub Second Hand Size 20(x3)
Date @4
Battery 394
Gain precise control by holding the staking tool vertically while pressing the hands. Includes eight stakes: flat conical, flat nylon tip and six with holes of .50-1.70mm.
Size 13 1/4 L
4.60mm thick
Hand Size 150/200/80/20
Date Dial @4
Three Eye Chrono
Battery 394
HOROTEC 01.020-C Watchmakers Screwdriver set with Aluminium Handles and Delrin comfortable head
Assortment of 10 watchmaker screwdrivers MSA01.020-C
Set of four pin vices in a convenient storage case. Pin vices are made of nickel plated brass. Openings range from 0.1mm – 5.0mm.
Genuine Omega Ladies Dynamic Brown Leather Strap. Does not include buckle.
Genuine Seiko Prospex Sumo Bezel Green & Stainless Steel. Fits model SPB103. Fits case back # 6R35-00A0
5126-8110 Crystal: $25 genuine Crown: $6.30 Case back: $6.30 4206-0250 Crystal: $15 generic Crown: $3.50 Crystal gasket: $6 6106-7690 Crystal: $19.20 generic Crown: $5 Case back: $6 7009-8023 Crystal: $16.50 generic Crown: $6.30 Case back: $6.30 5206-6110 Crystal:$27 genuine Crown: $6.30 Case back: $6.30 Crystal gasket: $6.30 Grand total: $167.30
Reimers Jr Low Water Probe Replacement Part #MBJ187
Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification.
Made of the highest quality steel, machined and finished for precision shape, accuracy and balance.
Handles are knurled.
Automatic Drop Oiler for Shock Protection Devices and Balance Bearings of all Kinds Without Removing the Cap Jewel. E.G., Incabloc, Kif, setting jewels etc.
Removes and inserts immediately, crystals without dis-assembling the watch. Will not damage the crystal. For any unbreakable crystal without tension ring.
114DE6552 Constellation Half Bar Two-Tone Genuine Omega Watch Band Link. Includes attaching pins, tubes and central decorative cap. New in package. Fits band # 6552/864
Spring bar tweezers, allows to take off the bracelet from the watch case.
Set of 22 individual cutters wood base provided with set
Diameter Range: Millimeters – 2.8mm to 22.2mm Inches – 7/64″ to 7/8″
Made from quality tool steel, the cutters are hardened on both hit and work ends.
Eco Drive capacitor 295-56(included)
Nylon dies for BB Style Press. 16 double sided dies with flat and tapered walls. Can be used for closing cases, press fitting crystals or installing bezels.
Size 13 1/4 L
5.00mm thick
Hand size 150/200/30/80/20
Date @4
Battery 394
24 full half-spheres on Wooden Base. All punches are polished and hardened to 50 Rockwell hardness at both ends, the sphere end and the hit end of the punch.
10 stainless steel pins with stainless steel pin holder. Sizes included: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.20, 1.50, 1.80, 2.00 mm
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
Base for screwing and unscrewing bracelets. Includes 4 screwdriver blades 1.0, 1.4, 1.8, 3.0 mm. Blade height can be easily adjusted with the thumb screw. 70mm base.
Drop injection oiler. For train wheel pivots, cup bearings, everywhere the oiler has to be positioned before depositing oil.
Used for removing watch crystals from one-piece watch cases. Available with 3 size watch case fittings:∅ 1.60 – 2.00 – 2.50 mm Includes key for removing the half-stem with the crown Size 4 X 0.79 X 0.79″ Inches (103 X 20 X 20mm) Swiss Made
Supplied with 1/16″ center hole and can be used with mandrels with 3/32″ or 1/8″ shank in power tools with safe maximum speed of 25,000 RPM. Sold by box of 100.
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
Swiss made tool for removing broken screws from watch movements. Includes two double sided bits (.80mm and 1.00mm).
The innovative design enables the user to raise, lower, or tilt, to direct the light source quickly and efficiently. Perfect for precision work!