Shop
Browse Subcategories
Used to hold uncured rubber and model when vulcanizing. Made of aluminum alloy for best heat conduction
Used to hold uncured rubber and model when vulcanizing. Made of aluminum alloy for best heat conduction
Slotted A for large machines. Suitable for high temperature melting of platinum, chromium, gold alloys, etc. Ideal for casting at temperatures up to 3000° F (1,650° C)
Capacity: 13 oz. (369 g)
Large A. Suitable for high temperature melting of platinum, chromium, gold alloys, and other hard metals. Ideal for casting at temperatures up to 3000° F (1,650° C)
Capacity: 13 oz. (369 g)
Crucible for use with the centrifugal casting machines. Made of fused silica with a clay bond, which will last through many meltings. Best choice for metal melting up to 2500°F (1371°C).
Crucible for use with the centrifugal casting machines. Made of fused silica with a clay bond, which will last through many meltings. Best choice for metal melting up to 2500°F (1371°C).
Made of fused silica with clay bond, for melting temperatures up to 2500°F(1371°C). Best choice for gold, silver, bronze, etc. Dimensions do not include 3/8″ pouring spout.
Graphite Melting Crucible, 1 kilo. For use with the Grobet “Metal Melt Furnace”
Large replacement tip for Mat Gun Kits 21.0955 and 21.0955/220.
Sprue Base, 4″, Tree Style. Perfect for high production operations.
Wesgo 10oz. Melting Dish. Designed for high temperature melting, including metals such as platinum.
Sprue Base, 3 1/2″, Tree Style. Perfect for high production operations.
Quickly reshapes and resurfaces abrasive stones to like-new condition. A very hard and coarse silicon carbide stone with 4 different sized half-round grooves on one side measuring 1/16″, 1/8″, 3/16″, and 1/4″. Stone itself measures: 3-1/2″ x 1-3/8″ x 9/16″
G-S Plastic Watch Crystals, DT Diver Tite style. Double Thick waterproof with ring. 24.5-34.9 in 0.10mm increments
Sapphire Mineral Glass Crystal 2mm Thick. Half and whole sizes 29.0 – 35.00mm
Silver Trim Domed 1mm thick Mineral Glass for watch crystal replacement.
Sprue Base, 3″, Tree Style. Perfect for high production operations.
Sprue Base, 2 1/2″, Tree Style. Perfect for high production operations.
Sprue Base, 2″, Tree Style. Perfect for high production operations.
Large sizes low dome pocket watch crystal for open face cases. GS PKH or Stella PLD will be supplied based on availability.
Black Rubber Pad for Vacuum Investing, 10-1/2″ Square
Newall Security Silicone, small tube high vacuum pressure waterproof watch sealant.
Slip the rubber extender over the flask prior to filling, to enable you to fill casting flasks to the top with investment. Prevents spilling of investment during vacuuming.
Slip the rubber extender over the flask prior to filling, to enable you to fill casting flasks to the top with investment. Prevents spilling of investment during vacuuming.
Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.
Diameter: 3/8″
Weight: 1 Pound Box
Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.
Diameter: 1/4″
Weight: 1 Pound Box
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.
1-5/16″ dia. x 11-1/4″
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Blue wax will bend 90 in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.
No more messy masking tape! These latex rubber sleeves are placed over the flask to contain the investment while pouring and also form a collar so that no spilling occurs. Dimensions listed are for the flask that each sleeve will fit. Sleeve must be removed prior to burnout. Warning: DO NOT USE if you are NRL latex sensitive.
Clear Acrylic Lucite Earring Box w/Black Velvet Insert. Sold by the dozen. 2 1/4″ x 2 1/4″ x 1 1/2″
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125° F). Burns out clean. 1 pound box.
Envelope Repair Tray, Black 4″ x 7 1/2″ x 4″. Half size.
Dissolves and washes away in water, making it perfect for use as cores for beads and other hollow items. Other insoluble waxes are worked over these waxes and when immersed in water, a shell remains. Supplied in irregular chunks.
Easily-shaped waxes that are specially suited for fill-ins and wax repair. Utility waxes can be used to easily correct mistakes or apply sprues to sprue bases. Pliable at room temperature.
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125°F.), burns out clean. Overall length 6″.
A special wax for building up wax patterns. It can be carved without chipping or flaking and can be softened over a flame, in hot water or with a heated tool. Comes in two grades of hardness, in boxes of approximately 24 sticks 4″ x 1/4″.
A special wax for building up wax patterns. It can be carved without chipping or flaking and can be softened over a flame, in hot water or with a heated tool. Comes in two grades of hardness, in boxes of approximately 24 sticks 4″ x 1/4″.
Excellent flow and high flexibility. This tough wax yields bright surfaces and will not become brittle in storage. Contains a built-in release agent. Sold in 1 pound boxes.
Excellent flow and high flexibility. This tough wax yields bright surfaces and will not become brittle in storage. Contains a built-in release agent. Sold in 1 pound boxes.
Grobet USA Swiss Pattern Precision precision files. The standard for quality and performance! Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by […]
Indispensable gauge helps to size gemstones quickly and accurately. Sizes range from 1 pt. to 2.1 ct., plus baguettes. Aluminum disks fold together when not in use.
This fine 6″ steel ruler is useful for quick measurements or scribing lines and features a hole in one end for hanging and includes a handy conversion chart on the back – inches to millimeters.
Now available in a high-impact, plastic gray color with more slots, including one which is extra wide for larger bracelets. Allows the repairer to tap out pins or take out and replace screws easily. Take the struggle out of band sizing. 2″ x 2-1/2″ x 1″.
Assortment of slices measuring 3-5/8″ x 1-1/2″ in varying thicknesses from 3/16″ to 1″.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color, and in a variety of shapes. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Assortment of slices measuring 3-5/8″ x 1-1/2″ in varying thicknesses from 3/32″ to 1/4″.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color, and in a variety of shapes. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
1-5/16″ high x 1-3/16″ wide.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
7/8″ OD.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Purple, Some flexibility 240° F (116° C).