Shop
Browse Subcategories
Set of 14 sizes 00 to 12. Steel shanks with traditional brass for years of life.
Indispensable gauge helps to size gemstones quickly and accurately. Sizes range from 1 pt. to 2.1 ct., plus baguettes. Aluminum disks fold together when not in use.
One jaw is half-round and the other is round. Overall length is 5-1/2″.
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Side cutter.
Practical wooden plier rack with seven compartments, space below to store various small tools and a drawer to safely hold those small parts essential to every bench. Dovetailed joints and varnished finish. Dimensions: 3-3/4″ x 6-1/2″ x 7-1/2″
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″ End cutter
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Chain nose.
Made of clear Lucite, our plier rack keeps tools off the bench and easy to find. Rack features holes for needle files, burs and other tools. Gives you more bench space and speeds up work because you spend less time looking for the right tool! Size: 10-1/2″ x 3-3/4″ x 4″
Made of clear lucite our plier rack keeps tools off the bench and easy to find. Rack is over ten inches long and features holes for needle files burs and other tools.
A breakthrough for platinum by EURO TOOL! A white compound which makes polishing platinum effortless compared to existing compounds – plus it gives a much brighter shine.
Platinized Titanium T-Bar Anode for Rhodium Plating. 10 1/4″ x 4″
Krohn platinized titanium mesh anode for Rhodium plating. Measures 1″x4″.
This mesh style platinized titanium anode is used with rhodium plating solution or acid-based gold solutions. With proper care, this high quality anodes will last indefinitely.
Plastic Water Proof Crystal with Colored Tension Ring (ET/WRA)
This 5 synthetic non-conductive tweezer is ideal for changing watch batteries.
Perfect for storing beads, findings and other small parts. 18 Compartments. Measures: 8-1/4″ x 4-1/8″ x 1-1/4″
Plastic handle, 10-1/2″ long, holds strips of emery paper or cloth 11″ x 1″. Strips can easily be replaced. Supplied with 2 strips, grit 120 and 240.
Plastic Square Watch Movement Box. 40mm x 40mm x 15mm. Snap lid.
Graduated in quarter sizes from 0 to 15 by US standards. Economical, rigid plastic with groove for stone set rings.
For measuring the correct amount of water to mix with investment and determining the amount of metal to be cast by the displacement method. 250ml.
This durable non-porous mallets are great for those delicate jobs – will not scratch or mar and reduces shock on impact. The plastic head can be refaced by filing and sanding.
This durable non-porous mallets are great for those delicate jobs – will not scratch or mar and reduces shock on impact. The plastic head can be refaced by filing and sanding.
3-1/2″ Head
An ideal “give-away” for potential customers to take home to determine the correct finger size of recipient who cannot be present to be measured. A sure way to clinch the sale.
Our universal needle file handle is made of durable plastic and shaped for comfortable use without fatigue. You can change files in seconds with a twist of the ring.
Pliable, gray-green in color. Used to fill cups in sprue bases. 1 lb. block.
Large sizes low dome pocket watch crystal for open face cases. GS PKH or Stella PLD will be supplied based on availability.
Double cloth, impregnated with jeweler’s rouge. Polishes silver, gold, nickel, copper and brass. Packed individually in plastic pouch. Measures 12″ x 14″
Pine Green #85 Cotton Filled Box 8″ x 5 1/2″ x 1 1/4″ – Sold by the Dozen
Knurled ring slides forward to close steel jaws, making It easy to operate with one hand. Handle is hollow. Capacity 0 to .051″ (0 to 1.3mm). Overall length is 4-1/8″.
Snap those stubborn pins out in a hurry with this clever device.
This upgraded pin removing tool is attractive aluminum with three long pins: 0.70, 0.80 and 0.90mm and three short pins: 0.70, 0.80 and 0.90mm diameter.
All steel construction Blackened body Shaft diameter 6.4 mm 3 Collets 1 mm, 2 mm, 3 mm
Pin & Tubes for Tri-Fold Buckles Assortment, 80 pieces. Sizes: 10, 12, 14, 16, 20, 22, 24mm. 10 pieces each size.
Pin & Tube Assortment 10-20mm, 60 Sets 1.5mm Head. 10sets each size. Sizes: 10, 12, 14, 1 , 18, 20mm
Manufactured at Grobet’s factory, Scies Miniatures, in Vallorbe, Switzerland.
Thickness: .011″
Width: .023″
Teeth per Inch: 51
Swiss made Pike Brand Jewelers Sawblades. 8/0 size
Thickness: .006″
Width: .013″
Teeth per Inch: 84
Swiss made Pike Brand Jewelers Sawblades. 8/0 size
Thickness: .007″
Width: .014″
Teeth per Inch: 84
Swiss made Pike Brand Jewelers Sawblades. 6/0 size.
Thickness: .007″
Width: .014″
Teeth per Inch: 76
Swiss made Pike Brand Jewelers Sawblades. 5/0 size.
Thickness: .008″
Width: .016″
Teeth per Inch: 66
Swiss made Pike Brand Jewelers Sawblades. 4/0 size.
Thickness: .009″
Width: .017″
Teeth per Inch: 64
Swiss made Pike Brand Jewelers Sawblades. 3/0 size.
Thickness: .010″
Width: .019″
Teeth per Inch: 57
Swiss made Pike Brand Jewelers Sawblades. 2/0 size.
Thickness: .010″
Width: .021″
Teeth per Inch: 53
Swiss made Pike Brand Jewelers Sawblades. Size 2.
Thickness: .013″
Width: .027″
Teeth per Inch: 44
Manufactured at Grobet’s factory, Scies Miniatures, in Vallorbe, Switzerland.
Thickness: .024″
Width: .053″
Teeth per Inch: 24
Swiss made Pike Brand Jewelers Sawblades. 1/0 size.
Thickness: .011″
Width: .023″
Teeth per Inch: 51
Swiss made Pike Brand Jewelers Sawblades. Size 1.
Thickness: .012″
Width: .025″
Teeth per Inch: 47
You can pay a lot more and never come close to the quality of this pickle pot. Stainless steel with a stoneware bowl. Sure they call it a crock-pot but it’s the best and most economical pickle pot available. Capacity is 16 oz. with a shipping weight of 2.6 lbs.
Picasso Blue Rouge Platinum Polishing Compound
PHD Hi Dome crystals with step for easy fitting. GS or Stella will be supplied depending on availability.
Lead-free and melts at about 450°F(232°C). An excellent metal for small sculptures.
Stainless steel heavy-duty flasks, with machined perforations, help assure a perfect cast since metal is being forced into cavities evenly from all directions. 3-3/8″ x 4″.
18-24 sticks per bundle, depending on diameter.
Stick Length: 5-3/4″
Diameter: 2.0mm
18-24 sticks per bundle, depending on diameter.
Stick Length: 5-3/4″
Diameter: 4.0mm
18-24 sticks per bundle, depending on diameter.
Stick Length: 7″
Diameter: 6.0mm