Shop
Browse Subcategories
Forms ingots or bullion of various sizes. Cast iron. Depth: 30 mm, Length: 120 mm, Width: 45 mm, Capacity: 124 g.
Suitable for electronics, laboratories, light industry, optical and camera assembly and repair.
Ring is placed on stretcher and the gentle tapping with the mandrel causes ring to expand. Economical and easy to use.
1.30mm Double Flange Spring Bar Assortment Stainless Steel, 100 pcs Ten each of the following sizes:
6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 16mm, 17mm, 18mm, 20mm
One end clamps from the outside for polishing and stone setting, while the other end holds from the inside for total circumference polishing and buffing.
No more messy masking tape! These latex rubber sleeves are placed over the flask to contain the investment while pouring and also form a collar so that no spilling occurs. Dimensions listed are for the flask that each sleeve will fit. Sleeve must be removed prior to burnout. Warning: DO NOT USE if you are NRL latex sensitive.
The opaque shellac sticks are used to set jewels and stones or to hold work temporarily. Heat to apply. Sticks are 7″ long.
A triplet lens system for correcting spherical and chromatic aberrations. Eliminates color degradation and puts every part of the wide field of view in sharp focus.
Standard ETA genuine screws for popular quartz movements. 2 pieces each of 27 sizes.
Complete set of screws for ETA 2892A2 Set includes: 5105/5121 – 4pcs 5125/5445/5462/51141/52595 -5pcs 5511/51497 – 4pcs 5110 -1pc 51134 -3pc
Size 5 1/2 x 6 3/4 L
3.00mm thick
Hand Size 65/110
Battery 319
Size 13 1/2 L
4.13mm thick
OA Height 6.00mm
Hand Size 70/120/18/20
Battery 399
Date @ 6
20mm Hadley Roma Black Stitched Silicone Watch Strap
Sapphire 1.5mm thick watch crystals for replacement
O’ Ring 0.90mm Watch Case Gasket Assortment 1 gross
Size 11 1/1 L
2.65mm thick
Hand Size 70/120/20
Luminox Very High Canon Pinion Overall Height 4.79mm
Date @3
Battery 371
Bergeon plastic bench mat 250mm x 350mm x 0.5mm. Self adhesive sticks to any work bench. Mat is antistatic. Works well in watchmaking and jewelry applications.
Plain, hardened steel mandrel may be used for shaping, straightening and enlarging rings. Also for gauging and holding rings while stone setting.
Velvet earring box with hinge. White satin lining. Sold by the dozen. Size: 2 1/8 x 1 7/8 x 1 1/2″. Choose from Black or green.
Size 12 1/2 L
4.3mm thick
Hand Size 70/120/17
3 Eye Chrono Hand Size 26
Date Dial @ 4:30
Battery 364
Also known as square handled needle files, these precision files are available in most of the needle file shapes.
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape.
Use steel on white metals such as: white gold, silver, and platinum. Crimped wire is .005″ thick and produces a soft matte like finish.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
For tools with 3/32″ shanks. Steel; for right side of motor.
For standard dental taper polishing motors.
Make his ring fit her! Adjusts to any size with no springs or wires to pinch or catch. Will not twist off during active use. Bridge provides strength when reducing from larger boy’s size to smaller girl’s size. All sold in packs of one dozen.
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
Easily-shaped waxes that are specially suited for fill-ins and wax repair. Utility waxes can be used to easily correct mistakes or apply sprues to sprue bases. Pliable at room temperature.
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 1/8″ (3.0 mm)
Reduced Height
Size 10 1/2 L
2.50mm thick
Hand Size 65/110
Date dial @3
Battery 371
Slim design for better visibility. Pushing down on body releases striking mechanism, which can be adjusted for light or heavy strokes. Removable centering point can be interchanged with cup-shaped riveting point. Pocket clip included.
Straight wire is .0035″ thick and produces a pronounced finish and is used for cleaning, deburring, and surface finishing.
Replacement needle for Bergeon # 5 Oiler (# 7720-5)
Needle measures 2.1″ inches (54mm) in length and has a diameter 0.8mm
Swiss made
Can also be used to replaced 2720-P
13 1/2 L
5.10mm thick
Hand Size 90/150/32
2 Eye Chrono
Date Dial @3
Battery 394
The protective heat-holding cover makes this efficient for melting with a torch. Handy pouring openings. Made of fused silica with clay bond, for melting temperatures up to 2500°F (1371°C). Best choice for gold, silver, bronze, etc.
Size 5 1/2 x 6 3/4 L
2.40mm thick
Hand Size 70/120
Battery 321
Parallel closing jaws with circular, rubber padded, hinged discs provide dependable case closing. Overall length is 7 1/2″.
Plastic handle, 10-1/2″ long, holds strips of emery paper or cloth 11″ x 1″. Strips can easily be replaced. Supplied with 2 strips, grit 120 and 240.
Size 10 1/2 L
3.00m thick
Hand Size 70/120/20
3 eye indicators hand size 20
Moon Dial
Battery 371
Set of 4 Horotec Swiss dip oilers with plastic handles and extra needles. 2 spare needles are stored inside the handle.
Assortment of 150 Round Tip Ball End Spring Bars an assortment of 150 pieces (10 each of 15 sizes) of stainless steel ball-end single flange spring bars – body diameter 1.60mm. All mm sizes from 8 to 22 mm.
This 14pc Tap and Die set has screwplate with taps for threading wire or re-threading stripped threads on screws. Sizes 0.7 – 2.0mm.
Sweep Second Hand Assortment, Various Colors, 40pcs
Yellow, White, Black & Red. Hole Sizes 0.18mm, 0.20mm & 0.25mm
Stainless Steel Men’s Classic Expansion Watch Band, 17-21mm. 6 5/8″.
Random selection of screws ranging in size from 1mm to 5mm long, .5mm to 1.5mm in diameter, with assorted head styles. Segmented wheel with selector-slot keeps screws organized.
Bergeon plastic bench mat 250mm x 350mm x 0.5mm. Self adhesive sticks to any work bench. Mat is antistatic. Works well in watchmaking and jewelry applications.
Bergeon plastic bench mat 250mm x 350mm x 0.5mm. Self adhesive sticks to any work bench. Mat is antistatic. Works well in watchmaking and jewelry applications.
Slim line acrylic job envelope holder is 3 1/2″ x 11″. Comes with three dividers to keep your job orders separate.
This 6-1/4 jumbo version is made of thicker high grade tool steel for heavier cutting jobs. Excellent for small sprues it will cut up to 14 gauge -2.5mm- soft wire.