Shop
Browse Subcategories
Use with Sangers emery shells. Drilled to fit on a tapered spindle. Also handy as a holder for polishing rings, chains, etc. 4-1/4″ with 1/8″ arbor hole.
The finest made! To smooth and polish the insides of rings. Fits snugly over wood mandrel. Made in both emery paper and longer lasting cloth.
The finest made! To smooth and polish the insides of rings. Fits snugly over wood mandrel. Made in both emery paper and longer lasting cloth.
Slot holds emery paper so it can be wound around mandrel to desired thickness.
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
Trifold Clasp Assortment, 12 pieces. Sizes include 2 pieces each: 10mm, 12mm, 14mm, 16mm, 18mm, 20mm.
GRS Third-Hand Attachments make precise soldering easy by holding parts in the exact position needed.
Works with the BenchMate System for soldering. Platform measures 4″ and easily attaches right to your Benchmate system.
The #120 grit is suited for small burrs and line removal.
Supplied with 1/16″ center hole and can be used with mandrels with 3/32″ or 1/8″ shank in power tools with safe maximum speed of 25,000 RPM. Sold by box of 100.
Supplied with 1/16″ center hole and can be used with mandrels with 3/32″ or 1/8″ shank in power tools with safe maximum speed of 25,000 RPM. Sold by box of 100.
Supplied with 1/16″ center hole and can be used with mandrels with 3/32″ or 1/8″ shank in power tools with safe maximum speed of 25,000 RPM. Sold by box of 100.
For use with light pressure at much less than 25,000 RPM maximum safe speed. 1/16″ holes for use with mandrel Nos. 43.124 or 43.154. Sold by box of 100.
Excellent for hand finishing of metals and composites. for used wood finishing, paint prep, and general cleaning. Pad measures 6″ x 9″. Grade: Ultra Fine, Color: Gray
Excellent for hand finishing of metals and composites. for used wood finishing, paint prep, and general cleaning. Pad measures 6″ x 9″. Grade: Very Fine, Color: Maroon
Excellent for hand finishing of metals and composites. for used wood finishing, paint prep, and general cleaning. Pad measures 6″ x 9″. Grade: Super Fine. Color: White
Special resin-over-resin bonding technique resists heat and holds the abrasive particles to give you amore uniform cut. Highly wear-resistant and waterproof.
Special resin-over-resin bonding technique resists heat and holds the abrasive particles to give you amore uniform cut. Highly wear-resistant and waterproof.
Special resin-over-resin bonding technique resists heat and holds the abrasive particles to give you amore uniform cut. Highly wear-resistant and waterproof.
Great for cleaning and maintaining hard to reach areas on platinum, gold, silver, copper, pewter and brass pieces.
7/8″ diameter, fine grit, aluminum oxide, brass center. Mounted on thin backing, provides excellent results in sanding and smoothing operations.
1/2″ diameter, brass center, coarse grit, aluminum oxide. Mounted on thin backing, provides excellent results in sanding and smoothing operations.
Supports work for flattening and laying out designs. Case-hardened. Ground flat and smooth.
Used as a base for riveting, drilling and staking small parts, our hex anvil is case hardened and well polished for long life.
Supports work for flattening and laying out designs. Case-hardened. Ground flat and smooth.
These anvils have a flat smooth case hardened surface and can be used as a base for staking, riveting and drilling small parts.
Illuminated 1.75X magnifier provides hands free viewing. Adjustable arm provides light source quickly and efficiently to work area
- Bright LED lights, 72 bulbs
- 5″ diameter lens
- 1 3/4x Magnification
Suitable for workshop or desktop use. Three Fluorescent bulbs provide ample illumination
Hard rubber is perfect for filing, detail work, and all jobs requiring a firm, but forgiving surface. Will not slide. A handy accessory for any workbench. Measures 4″ x 4″ x 1″.
Extra board for 135.0361, V-Slot Board and Clamp. Measures 7-1/2″ L x 2-1/2″ W.
Great, inexpensive way to store beads and findings safely and separately.
2″ x 2″ x 3/4″
Fits into slot in your work bench. Use as support when filing, sawing, setting, etc. Dimensions: 6-1/4″ x 2-1/4″
Fits into slot in your work bench. Use as support when filing, sawing, setting, etc. Dimensions 5-1/4″ x 2-1/8″
Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification.
Made of the highest quality steel, machined and finished for precision shape, accuracy and balance.
Handles are knurled.
3 oil holding cups and 3 dip oiler holders. Heavy-duty steel construction with rubber non-slip base.
Size 6 3/4 x 8 L
2.50mm thick
Hand Size 70/120
High canon Pinion version
Battery 364
Lightweight nylon black frame. Clear protective sides. Adjustable temples.
The safety glasses are supplied in a handy carry case with a polishing cloth to clean the Optics and a convenient cord to hold your glasses around your neck. Magnification: 2.5X. Working Distance: 11″ – 15″. Field View: 3.75″
Standard sodium bisulfate compound is mixed with warm water to make economical solution. Works best at 125 F (52 C).
Swiss Made Set of 10 Horotec Ball Bearing Screwdrivers, Sizes: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 1.80, 2.00, 2.50, and 3.00 mm.
These are the replacement pins for the Horotec Deluxe Watch Band and Strap Tool (MSA10.500). Sold individually, replacement pins are available in sizes from 0.40mm to 2.00mm.
Brush has four rows of .003″ wire and is 3-1/4″ L x 3/4″ H. Overall length 8-1/4″.
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.