Shop
Browse Subcategories
Nylon dies to fit square or rectangular watches to use with case closer CRY-905.00. Five sizes to a set dies range from 15mm to 24mm. Offers you greater flexibility to close any snapback case without damage.
Soft, fire-proof material, into which work or pins can be easily pressed. Measures 6″ x 3″ x 11/2″. Withstands temperatures up to 2000¬_ F (1093¬_ C).
A non-corrosive flux, harmless to hands or clothing. Washes off with water even after drying. Works with any soft solder. 1/2 oz. bottle.
A rouge less, dual-cloth buffing system. Ultra-Soft for Jewelry cleans and buffs gold jewelry. Measures 11″ x 14″
Newall Security Silicone, small tube high vacuum pressure waterproof watch sealant.
Newall Micro-Lube 2, Syringe Applicator. Lubricate and seal screw-back cases, stems and drive trains. Does not break down, migrate or bleed. Replaces KT-22 grease. (PML Grease)
This vise with 1-1/2 jaws offers a choice of clamping or screwing onto the bench. An excellent value and a necessity for every bench.
Size 6 3/4 x 8 L 2.50mm thick Hand Size 70/120 OAH 5.20mm Battery 364
Tool steel collets grip firmly when screw chuck is tightened. Chromium-plated handles are hollow to permit holding of long wires.
Combination round nose and side cutter. Use for making loops, bends and cutting wire without changing tools. 5-1/4″ Overall length.
Extra Fine
Size: 5/8″ x 1/8″
Hole: 1/16″
Box of 20
Revolutionary All-in-one Firescoff® is a spray-on ceramic coating that provides ultra-consistent solder flow and unbeatable protection against firescale.
Fabulustre 1 lb tube. One step formula for finishing precious and decorative metals. Removes scratches and leaves a high luster finish. Greaseless and clean.
Our Allegro Italian Diamond Tweezers are a reasonably priced line of tweezers which maintains a high standard of quality.
ML 2020 Lithium Rechargeable Solar Battery for Casio
Rubber ball to open and close all types of screw on case backs. Inexpensive, easy-to-use this case opener allows most watches to be opened and will not leave marks. Diameter is 2.6″ or 67mm.
The protective heat-holding cover makes this efficient for melting with a torch. Handy pouring openings. Made of fused silica with clay bond, for melting temperatures up to 2500° F (1371° C). Best choice for gold, silver, bronze, etc.
Use on white gold, platinum, chrome and stainless steel
Approximate weight, 6.5 oz.
Size: 5/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
Size: 7/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
Size: 5/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
Size: 7/8″ x 1/8″
Hole: 1/16″
Edge Square
Sold by the box of 20
Has two steel chucks with spare chuck held in end of hollow brass handle. Will not roll off your bench. Capacity 0 to .079″ (0 to 2.0 mm).
Use with rouge for final polishing. Made of soft cotton flannel, stitched with shellac centers.
Diameter: 8″
Ply: 3
Stitching: 4 rows
Sold individually
Used as an anti-oxidizer soldering or in making flux. 16 oz.
Torch Holder For Bench, Low bracket-type with wide top
This economy model is the ideal tool to hold settings and shanks together for accurate soldering. Length 5-1/2 -140mm-.
18-24 sticks per bundle, depending on diameter.
Stick Length: 5-3/4″
Diameter: 4.0mm
Genuine Seiko Bezel Clickspring 81380079. Fits case#s: 6R15-03W0 4R36-04Y0 Fits Turtle models: SRP777, SRP779, SRP773
This simple wooden rack will hold up to 10 pairs of pliers. Inexpensive and convenient keeping pliers and cutters handy and off the bench. 7-1/2 x 3-3/4 x 4-3/4.
Hardwood hammers with steel heads have a chisel shaped end for riveting and a flat end for light duty work.
Regular muslin is great when used with abrasive compounds such as tripoli to remove scratches. Sold individually.
Diameter: 8″
Ply: 55
Stitching: 4 Rows
Shellac Center
Uncombed
Use on white gold, platinum, chrome and stainless steel
Approximate weight, 4 oz.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.
9/16″ Diameter 3/32″ Shank. Sold by the dozen.
Combination inch and millimeter gauge. Capacity 2-1/4″ (60 mm). Graduations by 1/4 and 1.0 mm
Pacific Abrasives Silicone Carbide 7/8″, Coarse, Square Edge Wheels.
Sold in a pack of 20 pc.