Shop
Browse Subcategories
PVC Sport Style To Fit Casio & Others 20MM
PVC Sports Style To Fit Casio And Others 20MM
A lightweight vise mounted in a wood handle. Smooth jaws are 1-1/4″ wide and open to 1″. Overall length is 6-1/4″.
Serrated, grooved, spring action jaws open and close with large wing nut. Handles are hollow so that long wire will pass through. Two jaw widths are available. Both open to 1/4″. Overall length is 4-1/2″.
PVC Sport Style To Fit Casio G Shock 18MM
PVC Sport Style To fit Casio Databank 22MM
PVC Sport Style To Fit Citizen Promaster 24MM
Midget-sized hollow handle metal pin vise with screw chuck. Capacity 0 to .020″ (0 to .51 mm), overall length 1-7/8″.
Steel collet Is set into hollow brass handle with screw chuck. Capacity is 0 to .028″ (0 to .71mm), overall length 3-1/8″.
Genuine lizard brown leather strap with buckle
Genuine lizard black leather strap with buckle long
Different size steel collets are mounted in both ends of hollow handle. Capacity 0 to .099″ (0 to 2.5 mm), overall length 4-1/4″
With large free wheeling head, making it suitable for drilling, tapping, or using as a screwdriver.
H.18D has the same specs as the H.18, except includes a duplex spring for added flexibility. H.18 is for use with only 2.35mm (3/32″) shank burs.
Has two steel chucks with spare chuck held in end of hollow brass handle. Will not roll off your bench. Capacity 0 to .079″ (0 to 2.0 mm).
The H.18 is for use with only 2.35mm (3/32″) shank burs.
H.15D has the same specs as the H.15, except includes a duplex spring for added flexibility.
The H.15 Handpiece has hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work.
H.10 is a slender handpiece with rotating lever action that releases and closes the collet for quick and easy changes.
H.10D has the same specs as the H.10, except includes a duplex spring for added flexibility.
The H.8 is a slim collet type handpiece with pre-lubricated ball bearings that require no additional lubrication.
The H.8D has the same specs as the H.8, except includes a duplex spring for added flexibility.
The H.30® general purpose handpiece has prelubricated ball bearings that do NOT require any additional lubrication. Comes with HPCK-0 Chuck Key in molded plastic handle for changing accessories.
This 1/8″ thick rubber cushion provides an added layer of comfort to H.30 and H.30SJ Handpieces. Grip slides on easily but holds firmly.
Here the M.SR Hang-up style Motor, our most popular model, is teamed up with the C.FCT-1 foot operated Speed Control in plastic housing.
Foot operated speed control comes in a heavy, cast iron metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR.
Foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot.
This foot operated speed control comes in a heavy cast iron metal housing. The extra weight provides added stability and control.
Tool steel collets grip firmly when screw chuck is tightened. Chromium-plated handles are hollow to permit holding of long wires.
Tool steel collets grip firmly when screw chuck is tightened. Chromium-plated handles are hollow to permit holding of long wires.
The reliable C.FCT-1 is Foredom’s most popular foot operated speed control. It is made of heavy-duty plastic with durable solid state electronics.
Includes Pin Vices: 0 to .040″, .025″ to .062″, .050″ to .125″, and .115″ to .188″.
Knurled ring slides forward to close steel jaws, making It easy to operate with one hand. Handle is hollow. Capacity 0 to .051″ (0 to 1.3mm). Overall length is 4-1/8″.
Indented. Overall length 4-3/8 inches (111 mm). Sharp points.
Metal: Stainless Steel
Point: Medium Sharp
2 X 2 inch sweep second
Included are hands and hardware
Regular with different shaft lengths or high torque version for clocks w/long hands
You save (%)
Big watches are popular! This new version of the original Jaxa style case wrench now accommodates larger size watches up to 55mm diameter.
A safe and easy way to remove unbreakable watch crystals without dismantling the watch. The jaws open from 12 to 37mm and are designed for both ladies’ and gents’ watches.
Excellent work surface for delicate parts. Pad size measures 50mm in diameter.
- 20X Magnification
- 21mm Lens diameter
- LED light
- On/Off switch
- Batteries included
With a revolutionary micro fiber that will not snag or shed it is the optimal texture and softness for cleaning film from precious stones especially diamonds.
With pointed shank. Overall length 4-3/4 inches (121 mm). Sharp points.
Tips are cup-shaped to hold small round objects. Overall length 5 3/4″
Small holder fits in pocket. Wire jaws contract into body and plunger in end opens the jaws. Overall length 2 inches (51 mm).
For gripping and holding small objects. Plunger in handle opens wire jaws that contract back into handle. Overall length 4-3/4 inches
Chromium-plated steel tweezers with serrated points and locking device. Overall length 5-1/2 inches (140 mm) Fine points.