Horotec
Beryllium replacement screwdriver blades to fit most screwdrivers. Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry.
Stainless Steel headspring holds any of our loupes hands free. Made in Switzerland.
Foam insert for parts trays. Use these with Watch Repair Trays SKU# 152.0701. Measures 49x41x16
Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
Horotec Replacement Screwdriver Blades, Curved Style for better screw fit. These are the replacement blades for MSA01.207. 13 sizes
This Horotec bench mat is ultra thin yet sturdy. Mat has slightly sticky backing that allows it to stay in place, while also allowing for easy repositioning. It is roughly the same size as other bench mats at 13 3/4″ x 9 1/2″ x 0.1″.
Screwdriver sizes include: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.0, 2.5 & 3.0. Replacement blades included. Swiss made.
Latex roll on finger cots size large. Package of 100 pieces.
Chromed Brass Classic Screwdrivers, standard blades. 3 extra blades and pouch.
Asco Swiss Made loupe. Type H, 10x. 25mm diameter. Screw in bezel for easy lens cleaning.
These are the replacement pins for the Horotec Deluxe Watch Band and Strap Tool (MSA10.500). Sold individually, replacement pins are available in sizes from 0.40mm to 2.00mm.
Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 45mm in diameter.
Horotec Hand Remover Set, 2.5mm width
Precision Incabloc oiler with a gilt aluminum handle and three spare tips included.
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Swiss made screwdriver. Replacement blades sold here.
Asco Swiss Made loupe. Type H, 4x. 25mm diameter. Screw in bezel for easy lens cleaning.
Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 35mm in diameter.
BLASOLUBE® 301 universal lubricant grease for a very wide-ranging use. Excellent for high pressure applications.
Horotec #S5C brass tweezers with bent tips. Non-marring, perfect for delicate work. 5 1/4″ length.
This hand tool comes with with two different styled “Peek Stick” ends, pick shaped and beveled end. Ends are replaceable.
Episurf-Neo® is a new generation high performance epilame agent.
A pair of hands removers for sweep second hands and the small counter hands of chronographs. Tip width 1.0mm, length 105mm
The Turbo tester tests quartz wheel trains without opening the watch. Swiss made. The Turbo tests the mechanical side of a quartz analog watch movement.
Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).
Foam insert for parts trays. Use these with Watch Repair Trays SKU# 152.0701. Measures 232x48x15mm
Assortment of 9 watchmakers screwdrivers with ball bearing heads. This set is in a nice wooden case and includes nine spare blades and two spare set screws. Sizes included: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50, 3.00mm.
1.80mm Double Flange Spring Bar Assortment Stainless Steel, 100 pcs. Ten each of the following sizes:
12mm, 14mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 24mm
Horotec Assortment of Case Back Screws, Flat Head. 18 sizes, 10 pieces each size
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Made in France. Includes rotating stand. Screwdriver sizes 0.50-3.00mm.
Horotec Hand Remover Set, 4mm width. Works for many pocket watch hands.
Horotec Carbon Tip Tweezers, Extra Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
Assortment of hands fitting tools, equipped with Delrin® driven stakes. Knurled handle in anodized aluminum. Sizes: Flat-.80mm .50-1.00mm .65-1.10mm 1.50-2.00mm
Asco Swiss Made loupe. Type H, 3.5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Black dip oiler with a very fine point. 2 spare needles are stored inside the handle. Swiss Made
Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]
Horotec #S5 brass tweezers. Non-marring, can be used for hand or hairspring work. 4 3/4″ length.
Rubber tool for extracting rotating bezels from 38 to 45 mm.
BLASOLUBE® 301 universal lubricant grease for a very wide-ranging use. Excellent for high pressure applications. – Soft consistency – Temperatures use range : from -30° C up to +120/150° C.
1.30mm Double Flange Spring Bar Assortment Stainless Steel, 100 pcs Ten each of the following sizes:
6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 16mm, 17mm, 18mm, 20mm
Slotted Plastic Block Horotec is made of high impact plastic. This slotted block has 9 holes, and 8 slots, slots measure from 2.8 mm wide to 6.3 mm wide.
Economy watchmakers watch case opening knife, 1 penknife blade, 1 case opening blade. White finish. Swiss Army Style.
Horotec movement holder with central screw for caliber 3035
Asco Swiss Made loupe. Type H, 2.5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Horotec Carbon Tip Tweezers, Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
Anodized aluminum handle (Ø 6 mm) for a comfortable grip Length: 100 mm (4″) Tip diameter: 0.80 mm Fork width: 1.20 mm Stainless steel tips for enhanced durability Perfect for professionals and watch enthusiasts.
Set of 4 Horotec Swiss dip oilers with plastic handles and extra needles. 2 spare needles are stored inside the handle.
HOROTEC 01.020-C Watchmakers Screwdriver set with Aluminium Handles and Delrin comfortable head
Assortment of 10 watchmaker screwdrivers MSA01.020-C
PEEK stick – Beveled End Refill. 4.5 x 16mm. Refills for Horotec Peek Stick Hand Tool with Aluminum Anodized Grey Handle MSA26.009.
PEEK stick – Pointed End Refill. 4.5 x 16mm. Refills for Horotec Peek Stick Hand Tool with Aluminum Anodized Grey Handle MSA26.009.
Replacement tips (needles) for Horotec Incabloc Oiler. Sold as one piece each.
Screwdriver sizes include: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50. One replacement per size included. Rotating stand is made of solid aluminum and has a non-skid base. Top quality screwdriver set.
Novodiac Shock Spring Tool, CAL. ETA 2801 / 2824-2 / 2834-2 / 2836-2
Horotec Assortment of Case Back Screws, Round Head. 18 sizes, 10 pieces each size
Waterproof Crown Assortment Stainless 4.50mm-10.00mm x 2.50 Tube x 0.90 Tap.
Horotec Adjustable Movement Holder. For Movements from 8-3/4 to 19 Ligne size
Generic Microstella wrench for regulating the balance on Rolex calibers
Gain precise control by holding the staking tool vertically while pressing the hands. Includes eight stakes: flat conical, flat nylon tip and six with holes of .50-1.70mm.