Horotec
Slotted Plastic Block Horotec is made of high impact plastic. This slotted block has 9 holes, and 8 slots, slots measure from 2.8 mm wide to 6.3 mm wide.
Horotec movement holder with central screw for caliber 3035
Asco Swiss Made loupe. Type H, 3.5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Generic Microstella wrench for regulating the balance on Rolex calibers
Horotec #S5 brass tweezers. Non-marring, can be used for hand or hairspring work. 4 3/4″ length.
Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).
Replacement tips (needles) for Horotec Incabloc Oiler. Sold as one piece each.
Four-oil cup chrome-plated stand. The complete set is chromed and incudes : – 4 cups in anti-hygrometric glass – 1 mobile black plastic lid to protect oil from dust – 3 holes filled with pith wood for cleaning the oilers – 1 groove for oiler storage – 1 anti-skid rubber sole to ensure a good […]
Novodiac Shock Spring Tool, CAL. ETA 2801 / 2824-2 / 2834-2 / 2836-2
Horotec Assortment of Case Back Screws, Round Head. 18 sizes, 10 pieces each size
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.
Asco Swiss Made loupe. Type H, 5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Waterproof Crown Assortment Stainless 4.50mm-10.00mm x 2.50 Tube x 0.90 Tap.
Horotec movement holder with central screw for caliber 1530-1570
Comes with standard brush and 12 mm diameter round concave tip. Great for lens, watch crystals, and dials.
Stainless steel blades with solid green wooden handle. Set of 4, to open numerous snap back watch cases with ease. Comes in a plastic housing to keep tools organize. Handy for all watchmakers alike. Size: 155mm x 145mm x 37mm.
Gain precise control by holding the staking tool vertically while pressing the hands. Includes eight stakes: flat conical, flat nylon tip and six with holes of .50-1.70mm.
PEEK stick – Beveled End Refill. 4.5 x 16mm. Refills for Horotec Peek Stick Hand Tool with Aluminum Anodized Grey Handle MSA26.009.
PEEK stick – Pointed End Refill. 4.5 x 16mm. Refills for Horotec Peek Stick Hand Tool with Aluminum Anodized Grey Handle MSA26.009.
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
Screwdriver sizes include: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50. One replacement per size included. Rotating stand is made of solid aluminum and has a non-skid base. Top quality screwdriver set.
Small tool for bracelet screws.
– 3 blades Ø 1.00, 1.40 and 3.00 mm
– Metal anti-skid base.
Swiss Made Set of 10 Horotec Ball Bearing Screwdrivers, Sizes: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 1.80, 2.00, 2.50, and 3.00 mm.
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
Professional Screwdriver Sharpener. Mainly used by watchmakers who repair high end watches, especially on blued and gold screws.
Asco Swiss Made loupe. Type H, 2.5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Horotec Adjustable Movement Holder. For Movements from 8-3/4 to 19 Ligne size
This Horotec tool can be used with all the different dies that are available to fit Baume Mercier, Rolex, Omega, Breitling and many other screw back style watch brands. Swiss Made.
Seven pusher punch bits: 2.95 mm, 2.65 mm, 2.45 mm, 2.15 mm, 1.95 mm, 1.75 mm, and 1.55 mm. Will remove friction fit buttons & fit friction fit buttons back into the piece. Swiss made.
Horotec Pulse tester checks the electronic parts in analog watches. This particular tester was designed to test the coils and circuits of the watches.
Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]
HOROTEC 01.020-C Watchmakers Screwdriver set with Aluminium Handles and Delrin comfortable head
Assortment of 10 watchmaker screwdrivers MSA01.020-C
Die to open the Citizen Aqualand dive watch. This die has 5 notches that fit perfectly in the caseback. Made in France.