Horotec
Four-oil cup chrome-plated stand. The complete set is chromed and incudes : – 4 cups in anti-hygrometric glass – 1 mobile black plastic lid to protect oil from dust – 3 holes filled with pith wood for cleaning the oilers – 1 groove for oiler storage – 1 anti-skid rubber sole to ensure a good […]
Horotec Assortment of Case Back Screws, Round Head. 18 sizes, 10 pieces each size
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.
Asco Swiss Made loupe. Type H, 5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Waterproof Crown Assortment Stainless 4.50mm-10.00mm x 2.50 Tube x 0.90 Tap.
Horotec movement holder with central screw for caliber 1530-1570
Asco Swiss Made loupe. Type H, 2.5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Comes with standard brush and 12 mm diameter round concave tip. Great for lens, watch crystals, and dials.
Stainless steel blades with solid green wooden handle. Set of 4, to open numerous snap back watch cases with ease. Comes in a plastic housing to keep tools organize. Handy for all watchmakers alike. Size: 155mm x 145mm x 37mm.
Black dip oiler with a very fine point. 2 spare needles are stored inside the handle. Swiss Made
Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]
PEEK stick – Beveled End Refill. 4.5 x 16mm. Refills for Horotec Peek Stick Hand Tool with Aluminum Anodized Grey Handle MSA26.009.
PEEK stick – Pointed End Refill. 4.5 x 16mm. Refills for Horotec Peek Stick Hand Tool with Aluminum Anodized Grey Handle MSA26.009.
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
Small tool for bracelet screws.
– 3 blades Ø 1.00, 1.40 and 3.00 mm
– Metal anti-skid base.
Swiss Made Set of 10 Horotec Ball Bearing Screwdrivers, Sizes: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 1.80, 2.00, 2.50, and 3.00 mm.
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
Professional Screwdriver Sharpener. Mainly used by watchmakers who repair high end watches, especially on blued and gold screws.
Horotec Adjustable Movement Holder. For Movements from 8-3/4 to 19 Ligne size
This Horotec tool can be used with all the different dies that are available to fit Baume Mercier, Rolex, Omega, Breitling and many other screw back style watch brands. Swiss Made.
Seven pusher punch bits: 2.95 mm, 2.65 mm, 2.45 mm, 2.15 mm, 1.95 mm, 1.75 mm, and 1.55 mm. Will remove friction fit buttons & fit friction fit buttons back into the piece. Swiss made.
Horotec Pulse tester checks the electronic parts in analog watches. This particular tester was designed to test the coils and circuits of the watches.
HOROTEC 01.020-C Watchmakers Screwdriver set with Aluminium Handles and Delrin comfortable head
Assortment of 10 watchmaker screwdrivers MSA01.020-C
Die to open the Citizen Aqualand dive watch. This die has 5 notches that fit perfectly in the caseback. Made in France.
Casing cushion with a chromed metallic ring. 75mm in diameter.
Foam insert for parts trays. Use these with Watch Repair Trays SKU# 152.0701. Measures 232x48x15mm
Glass bottle for Epilame with a built in steel mesh basket for holding small parts. Use with Moebius Fixodrop or other epilame. With your epilame fluid in the bottle place your watch part in the steel mesh basket and insert in the top half of the bottle. Replace cap and turn up side down to […]
MSA12.723-A. Replacement tips for MSA12.723. Made of soft white delrin. Sold as a pair.
Horotec Polishing Vice For Watch Case Backs Ø25-50mm
Oscillating Weight Axle Punch for Rolex 3035/3135
Oscillating Weight Axle Punch for Rolex 2030/2035
Horotec Assortment of Case Back Screws, Phillips Head. 17 sizes, 10 pieces each size
Reversible case cushion in anti scratch synthetic material.
Waterproof Crown Assortment Stainless 4.50mm-10.00mm x 2.00 Tube x 0.90 Tap.
5 Pliers with cutting(2x), half round, round and flat jaws. Comes with wooden block for storage. 130mm length.
Horotec movement holder with central screw for caliber 2035-2135
Horotec Adjustable Movement Holder. For Movements from 3-3/4 to 11 Ligne size.
Set includes seven dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
Molykote DX Grease, 50 Gram Tube. ETA recommended lubrication of metal components for certain calibers.
Oil cup in blue anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
Horotec Key For Screw-on tubes Ø 2.75 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Horotec Flash Test is designed to be used on quartz watches with the cases opened or closed. Easily check for electronic circuit pulse, test battery voltage, and un-jam train wheels.
Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.
Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.