Horotec
Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]
Horizontal-type vise with center support allows for positioning blades on two sides at once. The blades are forced in with a few turns of the knob. Two pairs of blades included, 2mm and 4mm. Swiss.
Stainless steel blades with solid green wooden handle. Set of 4, to open numerous snap back watch cases with ease. Comes in a plastic housing to keep tools organize. Handy for all watchmakers alike. Size: 155mm x 145mm x 37mm.
Tool on stand for removing rollers. Hole puncher with cracked hardened plate on both sides, “V” shape to remove the adjusted plate on a balance staff.
Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
Set includes seven dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
Replacement Tip for Horotec Case Opener MSA07.115 – 4mm
Replacement Tip for Horotec Case Opener MSA07.115 – 2mm
Horotec Replacement Screwdriver Blades, Curved Style for better screw fit. These are the replacement blades for MSA01.207. 13 sizes
MSA12.723-A. Replacement tips for MSA12.723. Made of soft white delrin. Sold as a pair.
Replacement blades for Horotec MSA07.117 Bezel Remover. Mirror polished, hardened blades are interchangeable on all sides of the bezel remover.
Seven pusher punch bits: 2.95 mm, 2.65 mm, 2.45 mm, 2.15 mm, 1.95 mm, 1.75 mm, and 1.55 mm. Will remove friction fit buttons & fit friction fit buttons back into the piece. Swiss made.
Assortment of seven red suction dies for screw back watches. These dies are made of a soft, synthetic material that forms to fit almost any case back you come across. Sizes included are: 16, 20, 23, 26, 30, 34, and 40mm. Works perfectly with the Horotec Minipress and Maxipress.
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657
Horotec Pulse tester checks the electronic parts in analog watches. This particular tester was designed to test the coils and circuits of the watches.
Professional Screwdriver Sharpener. Mainly used by watchmakers who repair high end watches, especially on blued and gold screws.
Economy watchmakers watch case opening knife, 1 penknife blade, 1 case opening blade. White finish. Swiss Army Style.
Horotec Polishing Vice For Watch Case Backs Ø25-50mm
Slotted Plastic Block Horotec is made of high impact plastic. This slotted block has 9 holes, and 8 slots, slots measure from 2.8 mm wide to 6.3 mm wide.
Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 45mm in diameter.
Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 35mm in diameter.
This hand tool comes with with two different styled “Peek Stick” ends, pick shaped and beveled end. Ends are replaceable.
Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.
Oscillating weight holder for removing or installing ETA 7750 weight bolt. Can be used on calibers ETA 7750, A07.111, A07.161, A07.271.
Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.
Oscillating Weight Bolt Remover with Two Snap-on Keys. One for ETA 2000-1, 7750, 7751 & 7753 and one for ETA 2892, 2893, 2894 & 2895
20mm, 30mm, 33mm & 42mm 5 prong case back openers for Omega Seamaster watches. Horotec Swiss Made.
Set of four dies for opening Omega Seamaster case backs. Sizes included are: 20mm, 30mm, 33mm, 42mm. Swiss Made.
Horotec Metal Case Opener w/4 Nylon Dies. Swiss Made.
Provides maximum torque with little effort. 4 pairs of interchangeable pins (round, rectangle, knurled, curved). Large ergonomic top wheel for screwing and unscrewing with little effort.
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.
Latex roll on finger cots size large. Package of 100 pieces.
Case opener specially made for Baume & Mercier. Contents 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
Replacement tips (needles) for Horotec Incabloc Oiler. Sold as one piece each.
Precision Incabloc oiler with a gilt aluminum handle and three spare tips included.
Assortment of hands fitting tools, equipped with Delrin® driven stakes. Knurled handle in anodized aluminum. Sizes: Flat-.80mm .50-1.00mm .65-1.10mm 1.50-2.00mm
Gain precise control by holding the staking tool vertically while pressing the hands. Includes eight stakes: flat conical, flat nylon tip and six with holes of .50-1.70mm.
Horotec Hand Remover Set, 4mm width. Works for many pocket watch hands.
A pair of hands removers for sweep second hands and the small counter hands of chronographs. Tip width 1.0mm, length 105mm
This Horotec bench mat is ultra thin yet sturdy. Mat has slightly sticky backing that allows it to stay in place, while also allowing for easy repositioning. It is roughly the same size as other bench mats at 13 3/4″ x 9 1/2″ x 0.1″.
The HOROTEC© Flashtest is an advanced, multifunctional and portable tester for analog quartz watches and movements.
The Horotec demagnetizer is an electronic demagnetizer for very small parts such as hairsprings, watch wheels and mainsprings. You can even demagnetize tweezer tips and screwdriver blades.