Shop
Browse Subcategories
Standard, fast-cutting brown tripoli, used when rouge will be used for final finish, medium box, 1lb
You save (%)
Shaped for holding Burno style crucibles. Length 10-1/2 inches (267 mm).
You save (%)
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
You save (%)
3.5 x 2.0 tap 10, medium post, Sport top, Stainless Steel, 25 pieces
You save (%)
Genuine Bulova crystal 1271-7AY for case number GT-3593.
You save (%)
Bulova Accutron 214 Replacement Hatch Gasket G736
You save (%)
Bulova Accutron 218 Case Back Gasket G780
You save (%)
Bulova Snorkel Oceanographer Watch Crystal 706. 31.5 mm
You save (%)
Handy 5″W x 3″ D x 1″ H (127 x 76 x 25 mm) plastic bur holder helps keep 3/32″ (2.4 mm) shank burs in place, safe from loss or damage.
You save (%)
Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.
You save (%)
Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.
You save (%)
Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.
You save (%)
Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.
You save (%)
Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.
You save (%)
For drilling the holes for setting seed pearls and other round or half-round stones. 3/32″ shank.
You save (%)
For drilling the holes for setting seed pearls and other round or half-round stones. 3/32″ shank.
You save (%)
For drilling the holes for setting seed pearls and other round or half-round stones. 3/32″ shank.
You save (%)
Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.
You save (%)
Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.
You save (%)
Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.
You save (%)
Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.
You save (%)
Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.
You save (%)
Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.
You save (%)
Stainless steel clasp 6.0mm width at band connection, 40.0mm length, 12.0mm width.
You save (%)
Fill the cup in the center with wax or clay to form the base for the sprue.
You save (%)
Foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot.
You save (%)
Calypso Waterproofing Machine – Cylinder Gasket – 70mm. Round O ring gasket for between cover and cylinder. 70mm in diameter.
You save (%)
Waterproof tester up to 10 bars used with water The pressure is generated by a manual pump Leaks revealed by bubble stream Manual release valve for safety Cylinder is 80mm inside diameter, suitable for 2 watches Dimensions: 170 x 200 x 270mm Made in Italy Instructions included
You save (%)
Holds rings, leaving both hands free. Mounted in fixed position on asbestos-free base. Length of rod is 6″.
You save (%)
For use with cartridge rolls.
You save (%)
For use with cartridge rolls.
You save (%)
Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.
You save (%)
Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.
You save (%)
Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.
You save (%)
Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.
You save (%)
10 sizes, 10pcs each 2.0 x 6.8 2.5 x 4.2 2.0 x 4.2 2.5 x 3.65 2.5 x 3.6 1.7 x 3.3 2.2 x 3.2 2.2 x 2.9 2.2 x 2.85 1.5 x2.36
You save (%)
This combination case closer/crystal press beats anything in its price range and beyond. Don’t destroy watch cases or case backs by using the wrong tool. Our Combo Closer will give you years of satisfaction and service. Another Eurotool best buy.
You save (%)
This tool offers the best of both worlds – price and quality. Made of metal with multiple dies this crystal press/case closer is the perfect tool for snap-back cases.
You save (%)
The EURO TOOL case press offers the best inexpensive case closer available. This is one of our most popular items and the closer we most recommend. Every bench should have one.
You save (%)
Parallel closing jaws with circular, rubber padded, hinged discs provide dependable case closing. Overall length is 7 1/2″.
You save (%)
A must for every watchmaker this movement holder clamps onto the edge of your bench. The holder is made of metal and will hold any size movement.
You save (%)
3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
You save (%)
Choose from 5.3(yellow) & 6.0(blue) case tube remover for Rolex.
You save (%)
A safe non-toxic silicone based spray to release wax patterns from rubber molds. Non-flammable, non-CFC and environmentally safe.
You save (%)
Made of durable stainless steel. Use with Button Sprue base or Tree Sprue base for leak-proof seal.
You save (%)
Used to make small dent as starting point for drill. Punch is tapped with small hammer. Made of steel with knurled handle for firm gripping surface. Slim design, can also be used as a scriber.
You save (%)
Non-asbestos. Flat on one side, with grooves on the other, for holding shanks, chains, etc. Withstands temperatures up to 2000F (1093C). Measures 71/2″ x 71/4″ x 7/8″.
You save (%)
Mounted on base with swivel to provide the exact position or angle desired. 6″ ceramic rod is much cleaner than carbon and holds heat better. Clamp releases rod for replacement.
You save (%)
Ceramic 6×6 block with feet. Non-asbestos. Withstands temperatures up to 2000 F (1093 C). Rubber feet keep board raised above bench.
You save (%)
Thirty vibrant colors are available which can be mixed. Adheres to metals, wood, plastics, ceramics, etc. and can be stoned and polished.
You save (%)