Shop
Browse Subcategories
Swiss Made Bergeon screwdriver set. Set includes sizes: Ø 0.50 – 0.60 – 0.80 – 1.00 – 1.20 mm. Replacement blades available here.
You save (%)
The drum allows increased screwing force. Sizes available: Ø 1.00 – 1.20 – 1.40 – 1.60 – 1.80 mm.
You save (%)
Set of 4 screwdrivers with hexagonal blades. 54/56 HRC Hardened stainless steel blades. In plastic storage pouch. Includes sizes: 1.50mm, 2.00mm, 2.50mm & 3.00mm
You save (%)
Set of 10 entirely stainless steel ergonomic colour coded screwdrivers in a wooden box. Sizes:0.50mm, 0.60mm, 0.80mm, 1.00mm,1.20mm,1.40mm,1.60mm, 2.00mm, 2.50mm and 3.00mm.
You save (%)
5 pieces set in pouch. Includes: 1.20-1.50-2.00-2.50-3.00. Hardened stainless steel blades. Swiveling hexagonal head in self lubricating, synthetic POM (Derlin) material.
You save (%)
5 pieces set in pouch. Includes: 0.80-1.00-1.20-1.40-1.60. Hardened stainless steel blades. Swiveling hexagonal head in self lubricating, synthetic POM (Derlin) material.
You save (%)
A premium collection of 9 Swiss Screwdrivers on a rotating stand including 9 spare blades. Hardened stainless steel blades. Sizes: 0.50, 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50 mm.
You save (%)
Bergeon 30102 Watch Dip Oilers (individual)
You save (%)
Die-cast sturdy oiler -4 cups
Brushed / sanded finish
Replaceable felt pad located in center of oilers
Swiss made
You save (%)
Swiss made tool for removing broken screws from watch movements. Includes two double sided bits (.80mm and 1.00mm).
You save (%)
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.40-0.50mm
You save (%)
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.60-0.70mm
You save (%)
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.80 1.00
You save (%)
Beregon 30409-A watch crown winder tool. Use this handy tool on manual wind watches with crown sizes 3.0-4.5mm. Easy to use, just press the spring loaded top to expose the jaws. Made of nickel plated brass. Tool measures 3.5″ x 0.4″.
You save (%)
Beregon 30409-C watch crown winder tool. Use this handy tool on manual wind watches with crown sizes 4.0-5.5mm. Easy to use, just press the spring loaded top to expose the jaws. Made of nickel plated brass. Tool measures 3.5″ x 0.4″.
You save (%)
Bergeon slide locking pin vise. Steel jaws with 0 to 1.5mm opening.
You save (%)
Measures the size of watch hand holes
Gauges watch hands from .30 mm to 2.0 mm
Also features a gauge to measure the length of watch hands
Size 2 X 1 X 1″ Inches (45 X 45 X 15mm)
Swiss made
You save (%)
Rust remover from Bergeon. Excellent for watchparts. Bottle of 50gr.
You save (%)
Set of 15 Reamers and Spindle from Bergeon.
You save (%)
Swiss made precision plastic/bakelite blower. Will not roll off bench. Made to fit in your hand.
You save (%)
Complete with 4 collets in sizes .80mm, 1.0mm, 1.20mm, 1.50mm.
You save (%)
Bergeon 30610 Barrel Arbor Holder, .75mm. Slide locking jaws.
You save (%)
Swiss made slide locking jaws are specially designed to hold barrel arbors. 1.00mm diameter opening.
You save (%)
Bergeon Presto watch hand remover allows quick and easy removal of most watch hands. Specially designed ends prevent the tool from damaging the watch dial surface when removing hands.
You save (%)
Removes all sizes easily, as well as hands on larger watches. Sturdy jaws and side springs. Pusher blocks have long strokes. Bergeon 30637-2.
You save (%)
Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. For removing wheels on third wheel arbors and for chronograph driving wheels with 5 spokes. Blue handle.
You save (%)
Screwdriver with adapted blade to adjust the eccentric screw of the minute counter for the calibre range ETA Valjoux 7750.
You save (%)
Bergeon 31081 Screwdriver to Remove Etachron Pitons
You save (%)
Bergeon 31081-TETC Screwdriver with blade to turn ETACHRON pitons. Fine adjustment of the spiral centering between the racket pins
You save (%)
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2660, 2671 and 2688. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
You save (%)
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2801, 2824-2, 2834-2 and 2836-2. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
You save (%)
Watch crown winding tool made of black anodized aluminum. Swiss made.
You save (%)
Tool for fitting and removing spring-bars from watch bands. With standard points and forks, replacement tips available. See 3153A or 3153B.
You save (%)
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold small watch movements from 9 mm (3 ¾ ligne) to 25 mm (11 ligne) in size.
You save (%)