Shop
Browse Subcategories
Horotec Pulse tester checks the electronic parts in analog watches. This particular tester was designed to test the coils and circuits of the watches.
Set of 10 entirely stainless steel ergonomic colour coded screwdrivers in a wooden box. Sizes:0.50mm, 0.60mm, 0.80mm, 1.00mm,1.20mm,1.40mm,1.60mm, 2.00mm, 2.50mm and 3.00mm.
Assortment of 7 right hand mainspring winders & 7 left hand arbors for mainsprings
Forked Tip Only, 1.20mm, Swiss for Metal Spring Bar Tools
Enables the range of Bergeon 5537 Rolex dies and Breitling dies to be used with Horotec MSA07.320, Horotec MSA07.363 & Bergeon 5700-Z waterproof case openers.
Coarse ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4in Diameter, 3/4in Thick, 1in. (25mm) Hole Diameter with a 3/8in.(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
Semi-Coarse ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4″ Diameter, 3/4″ Thick, 1″(25mm) Hole Diameter with a 3/8″(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
Very-Fine ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4″ Diameter, 3/4″ Thick, 1″(25mm) Hole Diameter with a 3/8″(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
Polish outside and inside rings without changing buff. Wheel buff and inside ring buff are mounted on wood mandrel, drilled to fit tapered spindle. Wheel: 2″ x 1/2″ Ring: 3″ x 9/16″ – 3/4″ Sold individually.
Polish outside and inside rings without changing buff. Wheel buff and inside ring buff are mounted on wood mandrel, drilled to fit tapered spindle. Wheel: 2″ x 9/16″ Ring: 4″ x 5/8″ – 7/8″ Sold individually.
For brush or lap work, as it will adhere to these surfaces. Medium boxed, 1 lb
Standard, fast-cutting brown tripoli, used when rouge will be used for final finish, medium box, 1lb
Royal Velvet Red Rouge XXG. Deep red rouge for high luster on gold, silver plate and sterling. 1/4lb bar
A non-corrosive flux, harmless to hands or clothing. Washes off with water even after drying. Works with any soft solder. 1/2 oz. bottle.
Black leather smooth watch band 8mm
Black leather smooth watch band 9mm
Black leather smooth watch band 10mm
Black leather smooth watch band 12mm
Black leather smooth watch band 12mm Long
Black leather smooth watch band 14mm
Black leather smooth watch band 14mm Long
Black leather smooth watch band 17mm
Use to create a satin finish on gold, silver and other metals at a spindle speed of 3450 RPM. Made of synthetic fiber with a reinforced leather center. Use dry for longer life.
Use to create a satin finish on gold, silver and other metals at a spindle speed of 3450 RPM. Made of synthetic fiber with a reinforced leather center. Use dry for longer life.
Fomblin Grease (Rolex 2916) Homogenous white grease for O-rings, flat gaskets and lubrication of mechanical parts used in temperatures from -30 – +150C. Use on parts subject to friction when mineral and standard synthetic lubricants break down due to temperature changes and exposure to air. Does not deteriorate gasket material. Packed by weight, not by volume.
Ceramic 6×6 block with feet. Non-asbestos. Withstands temperatures up to 2000 F (1093 C). Rubber feet keep board raised above bench.
Vigor Heat Shield 16oz jar. Protects components under direct 5000 F (2760C) flame. Not necessary to remove stone before soldering. Prevents oxidation and is odorless and non-toxic.
Use to create a satin finish on gold, silver and other metals at a spindle speed of 3450 RPM. Made of synthetic fiber with a reinforced leather center. Use dry for longer life.
Use on clocks, and meters not directly exposed to winter temperatures. 20ml.
Use Moebius Fixodrop as a surface treatment on pallets and escape wheels. Prevents oil from spreading to unwanted areas. 100ml
Red tinted synthetic oil for quartz analog watches. Non-toxic, non-spreading, long-lasting, good viscosity. 2cc.
Synta-Visco-Lube. Use in slower moving parts and larger watch movements. Ideal for lubricating the pivot of staffs, oscillating weights and other parts of automatic watches. 2cc
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold small watch movements from 9 mm (3 ¾ ligne) to 25 mm (11 ligne) in size.
Cement designed and manufactured specifically for both plastic and glass watch crystals as well as other crafts. Convenient one ounce tubes with pin point applicator.
Slow setting, two-part, strong bond epoxy. This adhesive can be used for bonding non porous components such as metal findings, glass, china, ceramics, stone, metals, and more.
Devcon two-part epoxy joins materials together with a high-strength bond on metal, wood, concrete, glass, ceramics, china and more. Sets in five minutes and dries clear.
Gain precise control by holding the staking tool vertically while pressing the hands. Includes eight stakes: flat conical, flat nylon tip and six with holes of .50-1.70mm.
Long recognized for the clean, sharp surfaces they produce on tools, dies, blades, molds and almost any other metal piece requiring sharpening or smoothing.
Yellow abrasive with press-on/flip-off center hole feature. Set contains 25 fine, 25 coarse, and 50 medium, 7/8″ sanding discs, plus one 10.740 mandrel, in compartmented plastic box.
Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.
Removes scratches from plastic watch crystals. Polish comes with 1 cotton cloth
Apply the Polywatch and polish for 2-3 minutes. 5 gram bottle
SELVYT and SELVYT-SR polishing gloves
Knitted cuff. Without strand deposit on pieces to be polished. Can be washed several times.
Oil-cups
Coloured synthetic-material.
Ø 34 mm.
Tinged glass oil-cups Ø sink 6 – 12 mm.