Shop
Browse Subcategories
Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.
Perfect for storing beads, findings and other small parts. Measures: 10-3/4″ x 6-3/8″ x 1-3/4″
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Vigor Super Glue sets in 10 to 20 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass. Pack of 5 – 2 Gram Tubes.
Flame can be adjusted by raising or lowering slit sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel.
Snap those stubborn pins out in a hurry with this clever device.
A lightweight vise mounted in a wood handle. Smooth jaws are 1-1/4″ wide and open to 1″. Overall length is 6-1/4″.
This 39″ long inner shaft comes installed and should be used to replace broken or worn shafts on various motors.
Mallet is supplied with one flat brass head and one fiber head. Head 2″ (51 mm)
Metal: Non-Magnetic Stainless Steel
Length: 4-1/2″
Point: Sharp
Use brass on yellow metals such as copper and brass. Crimped wire is .005″ thick and produces a soft matte like finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.
Face Diameter: 9/16″ (14 mm)
Head Length: 2″ (51 mm)
Head Weight: 2 1/2 oz. (71 g)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/64″ (2.0 mm)
100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
Size 8 3/4 L
2.50mm thick
Hand Size 70/120/20
Date @6
Battery 362
Black suede leather band 12mm
Black suede leather band 14mm
Black suede leather band 16mm
Black suede leather band 18mm
Black suede leather band 20mm
18mm Swiss Army Style Brown Leather & Nylon Strap
19mm Swiss Army Style Brown Leather & Nylon Strap
18mm Swiss Army Style Black Leather & Nylon Strap
Size 10 1/2 L
3.05mm thick
Hand Size 65/110/20
3 eye chrono hand size 20
Battery 373
Hadley Roma Stainless Steel Mesh Metal Band, ends 18-22mm. Men’s dress band. Non expansion.
Printed with “Gifts of Distinction” rose design. Sold in packs of 100. Price break at 1000 bags.
Printed with “Gifts of Distinction” rose design. Sold in packs of 100. Price break at 1000 bags.
White, hard pre-polisher for precious metals.
White, hard pre-polisher for precious metals.
Size 10 1/2 L
3.40mm thick
Hand Size 70/120/20
Date dial @3
Battery 397
Size 10 1/2 L 3.45mm thick Hand Size 70/120/17 Battery 364 2 eye Chrono hand size .18
Ladies Classic Expansion Band Gold Plated, Fits ends 9-12mm
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 2
Size 10 1/2L
2.5mm Thick
Hand Size 70/120
Date dial @3
Battery 362
Size 10 1/2L
2.5mm Thick
Hand Size 70/120
Date dial @6
Battery 362
Replacement flat head tip for the screwdriver that removes oyster and jubilee bracelet link screws on Rolex® watches. 1.3mm Flat head tip fits Rolex® bracelet screws. OEM blade and tip sized to match the Rolex® Tool 2100. Tips are held in place with a set screw
Our gauges are nickel-plated for years of use at the retail level. Graduated in U.S. Standard half-sizes. Half-Round size 1 to 15
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4