Shop
Browse Subcategories
Jaws taper to 1/32″ at tips and jaw edges are beveled to prevent marring of soft wire. Used to make bends and for gripping and manipulating wires. Overall length 5 1/4″. Smooth jaws.
Also known as side cutters, they have semi-flush cutting edges for precision cutting of soft wires. Overall length 4-1/4″, length of cut 1/2″.
Flush cutting edges are for precision cutting of soft wire. Jaws are set at right angles for getting close to work. Overall length 4-1/4″, length of cut 9/16″.
Made in Germany. Small lightweight pliers, designed for delicate work. All have box joints to assure perfect alignment with smooth jaws and cushion grips. Overall length is 4-1/2″. Flat nose, length of jaw 7/8″
Grobet USA Swiss Pattern Precision file. Used for filing slots in small screws. 0.018″ in thickness. Single cut on both edges – Both sides are safe.
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Simple but very effective. Our new beaker holders allow the jeweler to place a 600ml beaker into an ultrasonic without fear of it spilling.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Half-Round files are tapered in width and thickness, coming to a point. Double cut on both sides.
European made 4pc Phillips screwdriver set features one of the smallest sizes available -1.20mm- knurled handles hex heads and tempered steel blades. Excellent for electronics computer and camera repair. Length 4-1/2.
Acon Cotter Pin Assortment #1028L. 1.0mm thick. 12 sizes, 8 pieces each size. Sizes range from 23.5-34.0mm. Refills available separately.
The GemOro 0752 UltraDock Charging Station can be used to cradle and charge GemOro testers when not in use.
Made to fit three to six quart units this 5 wide rack is heavily coated PVC over thick wire and features 18 hooks from which to hang rings deep into the tank for thorough cleaning.
Yellow abrasive with press-on/flip-off center hole feature. Set contains 25 fine, 25 coarse, and 50 medium, 7/8″ sanding discs, plus one 10.740 mandrel, in compartmented plastic box.
Natural, close-density oilstones with qualities that make them unequalled for sharpening tools such as gravers, knives, etc.
Loctite Threadlocker Blue 242 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. 6ml
Non-marring bezel remover
Outside diameter 2.6″ inches (66mm)
Inside diameter 1.65″ inches (42mm)
For bezel diameters 38-45mm
Mounted on base with swivel to provide the exact position or angle desired. 6″ ceramic rod is much cleaner than carbon and holds heat better. Clamp releases rod for replacement.
Grooved work surface disk is 41/2″ in diameter. Rotates on ball bearings, lazy-susan style, providing 360 degree access. Perfect for soldering small parts.
Pair of levers for clocks and alarm-clocks. In hardened steel. Specular polish work surface. Length: 210 mm.
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm
Measures the size of watch hand holes
Gauges watch hands from .30 mm to 2.0 mm
Also features a gauge to measure the length of watch hands
Size 2 X 1 X 1″ Inches (45 X 45 X 15mm)
Swiss made
For iron, steel and hard metals for coarse buffing and removing scratches, rust, corrosion, burs, etc. Not for gold, silver or plated articles. 5 oz.
Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.
Superior quality, soft textured buffs, stitched with leather centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 50
Stitching: 3 Rows
Leather Center
Use on white gold, platinum, chrome and stainless steel
Approximate weight, 6.5 oz.
Superior quality, soft textured, loose buffs, with plastic centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 54
Unstitched
Plastic Center
Superior quality, soft textured, loose buffs, with plastic centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 36
Unstitched
Plastic Center
Use with rouge for final polishing. Made of soft cotton flannel, stitched with shellac centers.
Diameter: 3″
Ply: 3
Stitching: 3 rows
Sold individually.