Watch Tools
Browse Subcategories
The Freedom automatic small parts cleaner. Five cleaning/rinsing stations, all ultrasonic, and thousands of dollars less expensive than the competition. The Freedom allows the watchmaker the “freedom” to do other tasks while the machine is automatically cycling. Made in the USA.
You save (%)
The Diablo vacuum leak detector functions by drawing a vacuum over the watch.
You save (%)
High quality full stainless steel tool to assemble And disassemble Rolex bands. 3 piece set.
You save (%)
Waterproof tester up to 10 bars used with water The pressure is generated by a manual pump Leaks revealed by bubble stream Manual release valve for safety Cylinder is 80mm inside diameter, suitable for 2 watches Dimensions: 170 x 200 x 270mm Made in Italy Instructions included
You save (%)
MTG-4000 testing device for mechanical watches. Complete, multifunctional model for professional use. Functions : – Measurement of beat rate (sec/day), mechanical watch beat error m/s and watch beat diagram – Acoustic watch beat simulation (can be switched off) – Amplitude measurement over a range of 90° to 350°, lift angle selection from 30° to 60° […]
You save (%)
The 2.2L capacity 5100CJ features an external heating element for optimized steam, operating at 3.5 bar / 50 P.S.I. pressure for efficient cleaning. Adjust the steam nozzle as needed, activated by a heavy-duty foot pedal switch. Smart for your wallet and the planet.
You save (%)
Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns
You save (%)
GEMORO’s advanced digital AuRACLE PRO is the ultimate verification instrument for gold and platinum testing. This state-of-the-art portable handheld tester has exceptional precision, is simple to use, and in only seconds provides accurate test results
You save (%)
Horotec Flash Test is designed to be used on quartz watches with the cases opened or closed. Easily check for electronic circuit pulse, test battery voltage, and un-jam train wheels.
You save (%)
This tool extracts bezels from divers watches. Provide with three different clamping jaws. Removes bezels from 27mm to 45mm.
You save (%)
Professional Screwdriver Sharpener. Mainly used by watchmakers who repair high end watches, especially on blued and gold screws.
You save (%)
The GEMORO AuRACLE Analyzer with its enhanced features makes using the world’s best gold & platinum tester technology even better!
You save (%)
Horotec Polishing Vice For Watch Case Backs Ø25-50mm
You save (%)
High quality Dazor 3-Bulb bench lamp. Adjustable arm makes positioning easy anywhere on the bench. Clamps or bolts to your bench with ease.
You save (%)
This Watch Bezel Remover is ideal for use on gold cases and bezels that are commonly used on Rolex and other expensive watches.
You save (%)
Made of hardened steel with mirror polished tips. Notched for easier positioning. Anodized aluminum handles. Tips are 2.5mm wide by 0.15mm thick. These are probably the best hand levers on the market.
You save (%)
Swiss Made Set of 10 Horotec Ball Bearing Screwdrivers, Sizes: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 1.80, 2.00, 2.50, and 3.00 mm.
You save (%)
Assortment of 24 burs for jewelers In tool steel. Fine cut. First quality. Shank: Ø 2.35 mm. Total length: 44.5 mm. Burs Ø 3 – 4- 6 mm.
You save (%)
Screwdriver sizes include: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50. One replacement per size included. Rotating stand is made of solid aluminum and has a non-skid base. Top quality screwdriver set.
You save (%)
First quality rotating stand with 9 screwdrivers from Bergeon. Very stable stand with adherent rubber plate.
You save (%)
The safety glasses are supplied in a handy carry case with a polishing cloth to clean the Optics and a convenient cord to hold your glasses around your neck. Magnification: 2.5X. Working Distance: 11″ – 15″. Field View: 3.75″
You save (%)
Bergeon 7100 Movement Holder – specifically for ETA 2894-2. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
You save (%)
Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually
You save (%)
Precision pliers with a locking thumb screw for fine adjustment of cannon pinions.
You save (%)
Assortment of 9 watchmakers screwdrivers with ball bearing heads. This set is in a nice wooden case and includes nine spare blades and two spare set screws. Sizes included: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50, 3.00mm.
You save (%)
Tool allowing to adjust the opening resistance of the folding clasp buckles. Includes 6 nylon dies: 3 convex and 3 concave. Swiss Made.
You save (%)
Bergeon 7100 Movement Holder – specifically for ETA 7750 series. Will also work with Sellita SW500. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
You save (%)
Three piece Bergeon pin vice assortment. Sizes included: 0.0-0.5mm 0.5-1.0mm/1.0-1.5mm 1.0-1.5/1.50-2.0mm
You save (%)
Complete with 4 collets in sizes .80mm, 1.0mm, 1.20mm, 1.50mm.
You save (%)
The innovative design enables the user to raise, lower, or tilt, to direct the light source quickly and efficiently. Perfect for precision work!
You save (%)
Assortment of 4 anodized aluminum oil cups with ceramic cups. The oil cups can be used individually or on the base plate.
You save (%)
Swiss made tool for removing broken screws from watch movements. Includes two double sided bits (.80mm and 1.00mm).
You save (%)
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
You save (%)
Used for removing watch crystals from one-piece watch cases. Available with 3 size watch case fittings:∅ 1.60 – 2.00 – 2.50 mm Includes key for removing the half-stem with the crown Size 4 X 0.79 X 0.79″ Inches (103 X 20 X 20mm) Swiss Made
You save (%)
Drop injection oiler. For train wheel pivots, cup bearings, everywhere the oiler has to be positioned before depositing oil.
You save (%)
Base for screwing and unscrewing bracelets. Includes 4 screwdriver blades 1.0, 1.4, 1.8, 3.0 mm. Blade height can be easily adjusted with the thumb screw. 70mm base.
You save (%)
Set of four dies for opening Omega Seamaster case backs. Sizes included are: 20mm, 30mm, 33mm, 42mm. Swiss Made.
You save (%)
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
You save (%)
10 stainless steel pins with stainless steel pin holder. Sizes included: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.20, 1.50, 1.80, 2.00 mm
You save (%)
Nylon dies for BB Style Press. 16 double sided dies with flat and tapered walls. Can be used for closing cases, press fitting crystals or installing bezels.
You save (%)
Set of four pin vices in a convenient storage case. Pin vices are made of nickel plated brass. Openings range from 0.1mm – 5.0mm.
You save (%)
Spring bar tweezers, allows to take off the bracelet from the watch case.
You save (%)
Removes and inserts immediately, crystals without dis-assembling the watch. Will not damage the crystal. For any unbreakable crystal without tension ring.
You save (%)
Black color. Comes with both clamp and base stand.
You save (%)
HOROTEC 01.020-C Watchmakers Screwdriver set with Aluminium Handles and Delrin comfortable head
Assortment of 10 watchmaker screwdrivers MSA01.020-C
You save (%)
Set of double-ended wheel countersinks in tempered steel – 4 pieces Our set includes 4 double-ended wheel countersinks made of high-quality tempered steel, perfect for watchmaking and precision tasks. Specifications: Wheels diameters: 1.80-2.10 / 2.50-3.00 / 3.50-4.00 / 4.50-5.00 mm Delivered in a convenient plastic pouch for easy storage and transportation.
You save (%)
The fully adjustable drill press stand made of high-quality material, small enough to easily fit on your workbench but tough enough for any project! A lever-action drill stand for quick, efficient, and precise work. Compatible with the Standard Flexshaft Handpiece.
You save (%)
Nice, wooden handled cannon pinion remover with lever. Can be used on all watch movements.
You save (%)