Shop
Browse Subcategories
Bergeon 5011-B Replacement Key for Crown & Stem Removal
You save (%)
3mm Transparent plastic stick can be sharpened without flaking. 5″ long.
You save (%)
Assortment of 7 right hand mainspring winders & 7 left hand arbors for mainsprings
You save (%)
Casing cushion “Large size”. With a synthetic ring. Central hollowed felt covered, with stamoïd, non-scratching the crystals and the cases. Provided with nonskid coating. Height: 15 mm.
You save (%)
Soft and will not scratch the parts. Matches the shape of watch cases with different geometries.
You save (%)
Bergeon Dip Oiler w/2 Spare Tips Blue
You save (%)
Bergeon Dip Oiler w/2 Spare Tips Green
You save (%)
Bergeon Dip Oiler w/2 Spare Tips Red
You save (%)
This Bergeon 5430 set of two hairspring collet tools is useful for rotating the collet on the balance staff, as well as a variety of other tasks.
You save (%)
Bergeon pair of small levers for removing hands have plastic handles, two different tip widths. Swiss.
You save (%)
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
You save (%)
Bergeon Case Opening Wrench to Fit Rolex Watches, Includes handle and six dies, Dies sized from 18.5 – 29.5mm
You save (%)
Enables the range of Bergeon 5537 Rolex dies and Breitling dies to be used with Horotec MSA07.320, Horotec MSA07.363 & Bergeon 5700-Z waterproof case openers.
You save (%)
This is the complete gasket replacement kit for the Bergeon 5555/10 waterproof tester. Contains 15 different rubber o-ring gaskets.
You save (%)
Plexi-cylinder Bergeon ref. 5555-98 -TP. Made for waterproof tester Bergeon Ref. 5555-98
You save (%)
Bergeon 5674-D Replacement nylon jaw for Bergeon 5674 Case Vise. Sold per jaw.
You save (%)
Bergeon Luminous Paste kits in six colors: White, green, yellow, blue, red & orange
You save (%)
Bergeon Luminous Paste Varnish – refill for BG5680. Mix with luminous powder and thinner.
You save (%)
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
You save (%)
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
You save (%)
Self adhesive. Stops tools rolling on the work bench.
You save (%)
First quality rotating stand with 9 screwdrivers from Bergeon. Very stable stand with adherent rubber plate.
You save (%)
Drum barrel made to fit over a standard watchmaker’s screwdriver to give you a better grip and more torque. With a knurled finish, the barrel attaches to screwdriver with a set-screw. 4 sizes available.
You save (%)
1.20mm forked remover for watch hands, wheels and rollers.
You save (%)
Fine silicium carbide circular abrasive wheel by Bergeon
Produces a Fine Satin Slightly Matte Finish
You save (%)
Plastic Compartment Box. 10 compartments. 24 mm deep.
You save (%)
This is the double ended replacement tip for Bergeon Swiss Made Spring Bar Tool (6111). The tip is reversible with a pointed tip on one end and a forked tip on the other.
You save (%)
Flat pliers with plastic jaws. Nickel-plated. Interchangeable jaws. Length 135 mm. Width of jaws 10 mm.
You save (%)
Coarse ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4in Diameter, 3/4in Thick, 1in. (25mm) Hole Diameter with a 3/8in.(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
You save (%)
Semi-Coarse ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4″ Diameter, 3/4″ Thick, 1″(25mm) Hole Diameter with a 3/8″(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
You save (%)
Very-Fine ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4″ Diameter, 3/4″ Thick, 1″(25mm) Hole Diameter with a 3/8″(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
You save (%)
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
You save (%)
Bergeon Scratch Brush Refills-12 piece pack
You save (%)
Bergeon Swiss Made pocket watch keys. 5 different size winding keys. The arms are for sizes 2, 4, 6, 8, and 10.
You save (%)
Bergeon Swiss Made pocket watch keys. 5 different size winding keys. The arms are for sizes 3, 5, 7, 9, and 11.
You save (%)
Bergeon Red Watchmaker’s pick positions batteries and watch parts without marring by using this 5 1/4in polystyrene tool. BG-6436 has one flat and one pointed end.
You save (%)
Bergeon Double Lever Case Opener. Has two edges for opening snap back cases, one on the end and one on the side. The edges are smaller than on other tools for more delicate cases.
You save (%)
Bergeon bracelet cutter. Cuts sprues up to 1/8″ (3mm) thick. Jaws are 7/8″ (2mm) long and pointed for easier access to tight areas. Made in Switzerland.
You save (%)
High quality tweezers for watchmakers. Wooden tips Quick and easy replacement of tips Non-magnetic steel tweezers
You save (%)
Base for screwing and unscrewing bracelets. Includes 4 screwdriver blades 1.0, 1.4, 1.8, 3.0 mm. Blade height can be easily adjusted with the thumb screw. 70mm base.
You save (%)
Measurements adapted to quartz watches. For measuring the thread of winding stems and crowns and the diameter of tubes, joints and crowns. Also suitable for measuring the distance between the lugs of watch cases. Dimensions: 85 x 85 x 85 x 1 mm.
You save (%)
Bergeon 6745 Replacement Pins for Bergeon 9988, Various Sizes
You save (%)
Carbon Fiber Tweezer set of 3. Three different styles included: sharp points, medium points and flat end points.
You save (%)
Forked Tip Only, 1.20mm, Swiss for Metal Spring Bar Tools
You save (%)
Bergeon 6767-B Replacement Tip. Fork in Steel for watchmaker’s, Ø 0.80 mm.
You save (%)
Pointed Tip Only, 0.8mm, Swiss for Metal Spring Bar Tools
You save (%)
Tool for fitting and removing spring-bars with fine points and forks. Replacement tips available.
Handle in stainless steel, points in hardened tempering steel.
Length : 145 mm
You save (%)
Tool for fitting and removing spring-bars with standard points and forks. Replacement tips available.
Handle in stainless steel, points in hardened tempering steel.
Length : 145 mm
You save (%)
SELVYT and SELVYT-SR polishing gloves
Knitted cuff. Without strand deposit on pieces to be polished. Can be washed several times.
You save (%)