Jewelry Tools

Pliable, blue wax wire approximately 4″ long.

This fine 6″ steel ruler is useful for quick measurements or scribing lines and features a hole in one end for hanging and includes a handy conversion chart on the back – inches to millimeters.

Superior quality, soft textured buffs, stitched with leather centers, are perfect for use with rouge to produce a high finish.

Diameter: 5″

Ply: 40

Stitching: 3 Rows

Leather Center

Superior quality knife edge buffs are perfect for use with rouge for buffing crevices.

Diameter: 5″

Ply: 12

Stitching: 7 Rows

Razor Edge

Polish outside and inside rings without changing buff. Wheel buff and inside ring buff are mounted on wood mandrel, drilled to fit tapered spindle.

Wheel: 2″

Ring: 4″ x 5/8″ – 7/8″

Sold individually.

Unmounted solid felt is used directly on a tapered spindle. Available in hard and extra hard.

Diameter: 9/16″

Length: 3″

Sold individually.

Exceptionally dense, chemically treated felt. Suitable for forming smooth, flat surfaces with sharp corners.

Diameter: 6″

Thickness: 1/4″

Hole: 1/4″

For polishing objects that have concave surfaces. Made of solid felt with pin hole center. Used with tapered mandrels.

Diameter: 1/2″

Length: 1″

Sold individually.

Excellent quality precision brush. Clean and polish in hard-to-reach places. Soft Bristle, 3/4″ Diameter 3/32″ Shank. Sold by the dozen.

Use brass on yellow metals such as copper and brass. Crimped wire is .005″ thick and produces a soft matte like finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.

Excellent quality precision brush. Clean and polish in hard-to-reach places.

1/4″ Trim, 3/16″ Diameter 3/32″ Shank. Sold by the dozen.

Chungking bristles mounted into hardwood hubs with 1/4″ arbor holes for use on the tapered spindles of polishing motors.Genuine Chungking bristle insures longer life & superior polishing action piece after piece. Wood hubs are seasoned hardwood and oil-treated to prevent splitting and guarantee long-lasting service. Bristle tufts are staple-set into hubs to remain securely fastened until completely worn down.

2 rows of converging bristle.

Hub Diameter – 1-5/8″

Trim Length – 11/16″

Overall Diameter – 3″

Chungking bristles mounted into hardwood hubs with 1/4″ arbor holes for use on the tapered spindles of polishing motors.Genuine Chungking bristle insures longer life & superior polishing action piece after piece. Wood hubs are seasoned hardwood and oil-treated to prevent splitting and guarantee long-lasting service. Bristle tufts are “staple-set” into hubs to remain securely fastened until completely worn down.

Style # 6A and B20

2 rows of converging bristle.

Hub Diameter – 1-1/4″ and Tapered Arbor Hole.

Trim Length – 5/8″

Overall Diameter – 2-1/2″

Pink Hi-Shine

Size: 5/8″ x 1/8″

Hole: 1/16″

Edge: Square

Sold by the box of 20

Fine

Overall Length: 5-1/2″ (140 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 6

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center provides firm grip on tapered spindle. Sold individually.

• Overall length: 120mm (4.72″)
• Jaws: Round Nose, Very Fine
• Jaw length: 20mm (0.79″)
• Tip width: 0.7mm

Sheath for the inner shaft of the Grobet C300 and S-300 flexshaft.

Handles are knurled.

Overall Length 5-1/2″ (140 mm)

Width 3/32″ (2.4 mm)

Cut 2

Handles are knurled.

Overall Length 4″ (100 mm)

Width 1/16″ (1.7 mm)

Cut 0

Handles are knurled.

Overall length 6-1/4″ (160 mm)

Width 15/64″ (5.8 mm)

Thickness 1/16″ (1.7 mm)

Cut 2

Handles are knurled.

Overall length 5-1/2″ (140 mm)

Width 7/32″ (5.5 mm)

Thickness 1/16″ (1.5 mm)

Cut 2

Handles are knurled.

Overall length 5-1/2″ (140 mm)

Width 7/32″ (5.6 mm)

Thickness 3/64″ (1.3 mm)

Cut 4

Handles are knurled.

Overall Length 6-1/4″ (160 mm)

Width 7/32″ (5.6 mm)

Thickness 5/64″ (2.0 mm)

Cut 6

Handles are knurled.

Overall Length: 6-1/4″ (160 mm)

Width: 7/32″ (5.5 mm)

Thickness: 1/16″ (1.4 mm)

Cut 4

Handles are knurled.

Overall Length: 6-1/4″ (160 mm)

Width: 7/32″ (5.5 mm)

Thickness: 1/16″ (1.4 mm)

Cut 2

Handles are knurled.

Overall Length: 7-3/4″ (200 mm)

Width: 15/64″ (5.9 mm)

Thickness: 3/32″ (2.2 mm)

Cut 4

Handles are knurled.

Overall Length: 7-3/4″ (200 mm)

Width: 15/64″ (5.9 mm)

Thickness: 3/32″ (2.2 mm)

Cut 0

Handles are knurled.

Overall Length: 6-1/4″ (160 mm)

Width: 7/32″ (5.3 mm)

Thickness: 5/64″ (2.1 mm)

Cut 2

Handles are knurled.

Overall Length: 5-1/2″ (140 mm)

Width: 3/16″ (5.0 mm)

Thickness: 5/64 (2.1 mm)

Cut 2

Half-round on two sides, with one side having a larger radius than the other. Tapered in width and thickness. Cut and usable to the point. Used primarily for filing interior curved surfaces. The double radius makes possible the filing at the junction of two curved surfaces or a straight and a curved surface. Double cut on both sides.

Length: 6″ (150 mm)

Width: 5/8″ (16.0 mm)

Thickness: 11/64″ (4.5 mm)

Cut 2

One jaw is half-round and the other is round. Overall length is 5-1/2″.

Graduated in millimeters across the top and 1/32″ increments across the lower half. All graduations are deeply etched.

Length 6″ (150 mm), width 1/2″ (12.7 mm)

Size: 5/8″

Hole: 1/16″

Edge: Knife

Sold by the box of 20