Jewelry Tools
Browse Subcategories
Designed to make opening watch cases easier. Just position the point between the case back and the case and slowly push.
The hardwood stand offers just the right degree of angle to make seeing and choosing the correct screwdriver as easy as possible.
For determining solution temperature. Temperature range 0-230 F.
Swiss made Pike Brand Jewelers Sawblades. Size 2.
Thickness: .013″
Width: .027″
Teeth per Inch: 44
Swiss made Pike Brand Jewelers Sawblades. Size 1.
Thickness: .012″
Width: .025″
Teeth per Inch: 47
Be assured of giving your customers an accurate fit every time with this ring and finger gauge set which has been matched in graduated and full sizes from 1-15.
The very best in bright white rhodium finish! 1 gram. UPS Shippable to lower 48 states.
Set of 12 extra-fine needle files allows you to get into tight spots. All are 4 -100mm- long and cut 2. This is the smallest set available and a must for fine work.
Swiss made Pike Brand Jewelers Sawblades. 2/0 size.
Thickness: .010″
Width: .021″
Teeth per Inch: 53
Swiss made Pike Brand Jewelers Sawblades. 3/0 size.
Thickness: .010″
Width: .019″
Teeth per Inch: 57
Swiss made Pike Brand Jewelers Sawblades. 4/0 size.
Thickness: .009″
Width: .017″
Teeth per Inch: 64
Swiss made Pike Brand Jewelers Sawblades. 5/0 size.
Thickness: .008″
Width: .016″
Teeth per Inch: 66
Swiss made Pike Brand Jewelers Sawblades. 6/0 size.
Thickness: .007″
Width: .014″
Teeth per Inch: 76
Similar to pattern No. 2, except points are .055 inches (1.4 mm) wide and rounded at the tips.
Sharp hooked points for wire wrapping, forming, bending and coiling. Angled points can also be useful for hard to get at spots.
Larger 2 gallon tank and usable capacity produces high quality clean steam. Made in USA!
Our stainless steel 6-3/4 miniature digital gauge is state-of-the-art. Beautifully finished it is practical and compact. It measures in millimeters and inches -maximum 100mm 4-. Accuracy is assured at 0.01mm.
Fill the cup in the center with wax or clay to form the base for the sprue.
No more messy masking tape! These latex rubber sleeves are placed over the flask to contain the investment while pouring and also form a collar so that no spilling occurs.
Well balanced handle is lightweight for just the right amount of spring.
Face Diameter: 1/2″ (13 mm)
Head Length: 2″ (51 mm)
Head Weight: 2 oz. (57 g)
General utility hammer with chisel formed end for spreading rivet heads. Supplied with a metal handle. Overall length 9″, head length 2 13/16″.
Graver is placed in either of two angled openings and rolled over flat oilstone to sharpen (oilstone not supplied). Measures 2-1/8″ x 1-3/8″ (54 x 35 mm).
Advanced diagonal flush cutting nippers, unsurpassed in cutting capacity.
Advanced diagonal micro-bevel cutting nippers, unsurpassed in cutting capacity.
Jaws taper to 1/32″ at tips and jaw edges are beveled to prevent marring of soft wire. Used to make bends and for gripping and manipulating wires. Overall length 5 1/4″. Smooth jaws.
Flush cutting edges are for precision cutting of soft wire. Jaws are set at right angles for getting close to work. Overall length 4-1/4″, length of cut 9/16″.
Grobet USA Swiss Pattern Precision file. Used for filing slots in small screws. 0.018″ in thickness. Single cut on both edges – Both sides are safe.
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.
These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Half-Round files are tapered in width and thickness, coming to a point. Double cut on both sides.
European made 4pc Phillips screwdriver set features one of the smallest sizes available -1.20mm- knurled handles hex heads and tempered steel blades. Excellent for electronics computer and camera repair. Length 4-1/2.
The GemOro 0752 UltraDock Charging Station can be used to cradle and charge GemOro testers when not in use.
The portable GemOro SUREgauge XL has a measuring range of 0-25mm/0-1″ with a precision accuracy of 0.01mm/0.0005″.
Made to fit three to six quart units this 5 wide rack is heavily coated PVC over thick wire and features 18 hooks from which to hang rings deep into the tank for thorough cleaning.
Loctite Threadlocker Blue 242 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. 6ml
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 16oz.
Chemkote muslin buffs with leather centers are more aggressive. The treated muslin helps remove surface scratches from work. Excellent for use with tripoli and abrasive compounds.
For iron, steel and hard metals for coarse buffing and removing scratches, rust, corrosion, burs, etc. Not for gold, silver or plated articles. 5 oz.
Eliminates the mess and does away with broken bars. Peel-back cardboard tube exposes only the amount needed. For hard metals such as platinum, chrome and stainless steel. Leaves little residue.
Use on white gold, platinum, chrome and stainless steel
Approximate weight, 6.5 oz.
Superior quality, soft textured, loose buffs, with plastic centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 54
Unstitched
Plastic Center
Superior quality, soft textured, loose buffs, with plastic centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 36
Unstitched
Plastic Center
Use with rouge for final polishing. Made of soft cotton flannel, stitched with shellac centers.
Diameter: 3″
Ply: 3
Stitching: 3 rows
Sold individually.
Sonicor #202 is an excellent mild alkaline cleaner specifically formulated for rapid removal of buffing compounds such as tripoli, rouge, etc. from most metal surfaces in ultrasonic cleaning.