Jewelry Tools
Browse Subcategories
3-1/2″ x 3-1/2″ x 1-3/8″, 1/2 lb. bar.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Green wax cannot be flexed. Approximate melting temperature is 240° F (116° C).
3-3/4″ x 1-1/8″ x 1-1/8″, 1/6 lb. bar.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Purple Some flexibility. Approximate melting temperature is 240° F (116° C).
Various shapes and colors for trial use. Also handy for having around in case an odd piece is needed.
6″ long arch-shaped block of carving wax is designed to simplify the construction of bracelets. From one blank style you can create round, oval or square bracelets in a variety of sizes. Simply cut two slices of the desired thickness to form the bracelet, then trim using the Matt Shaper.
Blue Wax, softer and highly flexible, this wax will take a 90° bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature 220°F (104°C).
Enlarge the finger size of your wax models quickly and accurately. Hardwood mandrel is specially machined to incorporate a cutting steel blade that extends from the handle to the tip on the tapered section. Slide this tool through the hole of wax ring or ring tube and gently rotate clockwise. As the blade turns it scrapes inner wall, enlarging the ring to the size that is marked along the mandrel, leaving a smooth and even finish on the ring.
3-1/8″ L x 1-7/16″ W and assorted thickness from 1/8″ to 1″. Box of 12.
Matt Carving Wax Slices, Purple, Assortment of 9 pieces
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x 3-1/8″, 1/2 pound bar.
Chemkote muslin buffs with shellac centers are more aggressive. The treated muslin helps remove surface scratches from work. Excellent for use with tripoli and abrasive compounds.
Use the best buff available for final polishing of platinum. Stiff, chemically treated muslin with good cutting action and high compound retention. Provides high lustre. Reduce polishing time. Durable and long lasting. Sold individually.
Diameter: 6″
Ply: 5
Stitching: 4 Rows
Leather Center
Use the best buff available for final polishing of platinum. Stiff, chemically treated muslin with good cutting action and high compound retention. Provides high lustre. Reduce polishing time. Durable and long lasting. Sold individually.
Diameter: 5″
Ply: 40
Stitching: 3 Rows
Leather Center
Durable, treated muslin. Ideal for use with aggressive compounds to remove scratches from gold. Excellent compound retention. Provides robust polishing for a high lustre on all hard metals. Sold individually.
Diameter: 5″
Ply: 50
Stitching: 4 Rows
Leather Center
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Knife Edge Wheel
Diameter: 13/16″
3/32″ Shank
Sold by the Dozen.
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Knife Edge Wheel
Diameter: 11/16″
3/32″ Shank
Sold by the Dozen
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Inverted
Diameter: 11/15″
3/32″ Shank
Sold individually.
Use to obtain matte finishes on metal, wood and plastic. Nylon fibers impregnated with abrasive granules. Use with mandrel 43.162.
Diameter: 1″
Thickness: 1/4″
Arbor Hole: 1/8″
Medium
Sold individually.
Use to obtain matte finishes on metal, wood and plastic. Nylon fibers impregnated with abrasive granules. Use with mandrel 43.162.
Diameter: 1″
Thickness: 1/4″
Arbor Hole: 1/8″
Fine
Sold individually.
This special taper-shaped buff is well suited for polishing interior and broad surfaces.
Diameter: 2-1/2″
Length: 2-1/4″
Sold individually.
Made of 100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer with minimal fraying and better compound retention. Achieve a smooth, uniform finish with superior coloring quality every time.
Diameter: 7/8″
Ply: 16
Stitching: 1 Row
Shellac Center
Sold by the Dozen
Superior quality knife edge buffs are perfect for use with rouge for buffing crevices.
Diameter: 6″
Ply: 12
Stitching: 9 Rows
Razor Edge
Superior quality knife edge buffs are perfect for use with rouge for buffing crevices.
Diameter: 4″
Ply: 12
Stitching: 7 Rows
Razor Edge
Superior quality knife edge buffs are perfect for use with rouge for buffing crevices.
Diameter: 3″
Ply: 9
Stitching: 3 Rows
Razor Edge
Designed for polishing small and difficult to reach areas. For use with a mandrel.
Diameter: 2″
Ply: 16
Stitching: 4 Rows
Sold by the dozen
Designed for polishing small and difficult to reach areas. For use with a mandrel.
Diameter: 1-1/2″
Ply: 16
Stitching: 3 Rows
Sold individually
Designed for polishing small and difficult to reach areas. For use with a mandrel. Diameter: 1″ Ply: 16 Stitching: 1 Row Sold individually
Designed for polishing small and difficult to reach areas. For use with a mandrel.
Diameter: 7/8″
Ply: 16
Stitching: 1 Row
Sold individually.
This special shaped cylinder buff is well suited for polishing interior and broad surfaces.
Diameter: 2″
Length: 1-3/4″
Sold individually.
Regular muslin is great when used with abrasive compounds such as tripoli to remove scratches. Sold individually.
Diameter: 8″
Ply: 55
Stitching: 4 Rows
Shellac Center
Uncombed
Regular muslin is great when used with abrasive compounds such as tripoli to remove scratches. Sold individually.
Diameter: 3″
Ply: 35
Stitching: 3 Rows
Shellac Center
Uncombed
Regular muslin is great when used with abrasive compounds such as tripoli to remove scratches. Sold individually.
Diameter: 2-1/2″
Ply: 30
Stitching: 2 Rows
Shellac Center
Uncombed
Regular muslin is great when used with abrasive compounds such as tripoli to remove scratches. Sold individually.
Diameter: 2″
Ply: 30
Stitching: 2 Rows
Shellac Center
Uncombed
Use the best buff available for final polishing of platinum. Stiff, chemically treated muslin with good cutting action and high compound retention. Provides high lustre. Reduce polishing time. Durable and long lasting. Sold individually.
Diameter: 6″
Ply: 12
Stitching: 1 Rows
Razor Edge
Leather Center
Chemkote knife-edge muslin buffs great for buffing in crevices. Excellent for use with tripoli and abrasive compounds.
Diameter: 5″
Ply: 12
Stitching: 9 Rows
Leather Center
Razor Edge
Chemkote knife-edge muslin buffs great for buffing in crevices. Excellent for use with tripoli and abrasive compounds.
Diameter: 6″
Ply: 12
Stitching: 5 Rows
Leather Center
Razor Edge
Chemkote knife-edge muslin buffs great for buffing in crevices. Excellent for use with tripoli and abrasive compounds.
Diameter: 4″
Ply: 12
Stitching: 2 Rows
Leather Center
Razor Edge
Hard solid felt, with tapered edges for polishing joints and crevices.
Diameter: 5/8″
Use with mandrels sold separately.
Sold by the Box of 100.
Hard solid felt, with tapered edges for polishing joints and crevices.
Diameter: 5/8″
Use with mandrels sold separately.
Sold by the Box of 24.
Hard solid felt, with tapered edges for polishing joints and crevices.
Diameter: 1/2″
Use with mandrels sold separately.
Sold by the Box of 24.
Suitable for all purpose polishing and buffing. Pin hole centers.
Diameter: 4″
Thickness: 1/2″
Soft
Suitable for all purpose polishing and buffing. Pin hole centers.
Diameter: 3″
Thickness: 1/2″
Extra Hard
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Diameter: 1″
Thickness: 1/4″
Soft
Sold by the Box of 100.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Diameter: 1″
Thickness: 1/8″
Soft
Sold by the Box of 24.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Diameter: 1″
Thickness: 1/8″
Hard
Sold by the Box of 24.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Diameter: 1/2″
Thickness: 1/8″
Hard
Sold by the Box of 24.
Polish outside and inside rings without changing buff. Wheel buff and inside ring buff are mounted on wood mandrel, drilled to fit tapered spindle.
Wheel: 2″
Ring: 3″ x 9/16″ – 3/4″
Sold individually.
Unmounted solid felt is used directly on a tapered spindle. Available in hard and extra hard.
Diameter: 5/8″
Length: 4″
Sold individually.
Unmounted solid felt is used directly on a tapered spindle. Available in hard and extra hard.
Diameter: 9/16″
Length: 3″
Sold individually.
Unmounted solid felt is used directly on a tapered spindle. Available in hard and extra hard.
Diameter: 9/16″
Length: 3″
Sold individually.
Exceptionally dense, chemically treated felt. Suitable for forming smooth, flat surfaces with sharp corners.
Diameter: 6″
Thickness: 1/4″
Hole: 1/2″
Perfect for polishing objects with rounded surfaces. Solid felt with pinhole center. Used with tapered mandrels.
Diameter: 3/4″
Length: 1-1/2″
Sold individually.
Perfect for polishing objects with rounded surfaces. Solid felt with pinhole center. Used with tapered mandrels.
Diameter: 1/2″
Length: 1″
Sold individually.
For polishing objects that have concave surfaces. Made of solid felt with pin hole center. Used with tapered mandrels.
Diameter: 3/4″
Length: 1-1/2″
Sold individually.
For polishing objects that have concave surfaces. Made of solid felt with pin hole center. Used with tapered mandrels.
Diameter: 1/2″
Length: 1″
Sold individually.